Pairing A Phone - Chevrolet 2010 Tahoe Owner's Manual

Pairing a Phone

1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Pair . The system responds with instructions
and a four digit PIN number. The PIN number will
be used in Step 4.
4. Start the Pairing process on the cell phone that will
be paired to the vehicle. Reference the cell phone
manufacturers user guide for information on this
process.
Locate the device named General Motors in the
list on the cellular phone and follow the instructions
on the cell phone to enter the four digit PIN
number that was provided in Step 3.
4-118
g
for two seconds. The system
5. The system prompts for a name for the phone. Use
a name that best describes the phone. This name
will be used to indicate which phone is connected.
The system then confirms the name provided.
6. The system responds with <Phone name> has
been successfully paired after the pairing process
is complete.
7. Repeat Steps 1 through 7 for additional phones to
be paired.
Listing All Paired and Connected Phones
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say List . The system lists all the paired Bluetooth
devices. If a phone is connected to the vehicle, the
system will say Is connected after the connected
phone.
g
for two seconds. The system