Chevrolet 2010 Impala Owner's Manual page 233

Dual Tone Multi-Frequency (DTMF)
Tones
The in-vehicle Bluetooth system can send numbers and
numbers stored as name tags during a call. This is used
when calling a menu driven phone system. Account
numbers can be programmed into the phonebook for
retrieval during menu driven calls.
Sending a Number During a Call
b g
1. Press . The system responds with "Ready"
followed by a tone.
2. Say "Dial". The system responds with "Say a
number to send tones" followed by a tone.
3. Say the number to send.
•
If the system clearly recognizes the number it
responds with "OK, Sending Number" and the
dial tones are sent and the call continues.
•
If the system is not sure it recognized the
number properly, it responds "Dial Number,
Please say yes or no?" followed by a tone.
If the number is correct, say "Yes". The system
responds with "OK, Sending Number" and
the dial tones are sent and the call continues.
Sending a Stored Name Tag During a Call
b g
1. Press . The system responds with "Ready"
followed by a tone.
2. Say "Send name tag." The system responds with
"Say a name tag to send tones" followed by a tone.
3. Say the name tag to send.
•
If the system clearly recognizes the name tag it
responds with "OK, Sending <name tag>" and
the dial tones are sent and the call continues.
•
If the system is not sure it recognized the name
tag properly, it responds "Dial <name tag>,
Please say yes or no?" followed by a tone. If the
name tag is correct, say "Yes". The system
responds with "OK, Sending <name tag>" and
the dial tones are sent and the call continues.
Clearing the System
Unless information is deleted out of the in-vehicle
Bluetooth system, it will be retained indefinitely. This
includes all saved name tags in the phonebook and
phone pairing information. For information on how to
delete this information, see the above sections on
Deleting a Paired Phone and Deleting Name Tags.
4-83