Electronic Stability Control Indicator Light - Chevrolet 2010 Impala Owner's Manual

Hide thumbs Also See for 2010 Impala:
Table of Contents

Advertisement

If the traction control system is manually turned off, this
light comes on and the TRACTION CONTROL OFF
message appears on the DIC.
See Traction Control System (TCS) on page 5-7
and DIC Warnings and Messages on page 4-44 for
more information.
Electronic Stability Control Indicator
Light
This light comes on briefly
while the engine is started.
If it does not, have the
vehicle serviced by your
dealer/retailer. If the
system is working normally
the indicator light will then
go off.
This light can come on after the vehicle is first driven
and the STABILITRAK NOT READY message appears
in the Driver Information Center (DIC). See Electronic
Stability Control (ESC) on page 5-6 for more information.
If the light stays on, or comes on while driving a
SERVICE STABILITRAK message appears in the DIC.
This indicates that there may be a problem with the
Electronic Stability Control (ESC) system and the vehicle
may need service. When this warning light is on and the
SERVICE STABILITRAK message appears on the DIC,
the ESC system does not assist in controlling the vehicle.
When the system is active, the light flashes while the
system is assisting in controlling the vehicle.
See Electronic Stability Control (ESC) on page 5-6 and
DIC Warnings and Messages on page 4-44 for more
information.
4-29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents