Storing Name Tags - Chevrolet 2010 Impala Owner's Manual

Listing All Paired and Connected Phones
b g
1. Press and hold
system responds with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "List". The system lists all the paired Bluetooth
devices. If a phone is connected to the vehicle, the
system will say "Is connected" after the connected
phone.
Deleting a Paired Phone
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "Delete". The system asks which phone to
delete followed by a tone.
4. Say the name of the phone to be deleted. If the
phone name is unknown, use the "List" command
for a list of all paired phones. The system responds
with "Would you like to delete <phone name>?
Yes or No" followed by a tone.
5. Say "Yes" to delete the phone. The system
responds with "OK, deleting <phone name>".
4-76
for two seconds. The
for two seconds. The system
Linking to a Different Phone
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
3. Say "Change phone". The system responds with
"Please wait while I search for other phones".
•
If another phone is found, the response will be
"<Phone name> is now connected".
•
If another phone is not found, the original phone
remains connected.

Storing Name Tags

The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
The system uses the following commands to store and
retrieve phone numbers:
•
Store
•
Digit Store
•
Directory
for two seconds. The system