Making A Call - Chevrolet 2010 Impala Owner's Manual

Using the Delete All Name Tags Command
The delete all name tags command deletes all stored
phone book name tags and route name tags for OnStar
(if present).
To use the delete all name tags command:
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Delete all name tags". The system responds
with "You are about to delete all name tags stored
in your phone directory and your route destination
directory. Are you sure you want to do this? Please
say yes or no."
•
Say "Yes" to delete all name tags.
•
Say "No" to cancel the function and return to the
main menu.

Making a Call

Calls can be made using the following commands:
•
Dial
•
Digit Dial
•
Call
•
Re-dial
for two seconds. The system
Using the Dial Command
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Dial". The system responds with "Dial using
<phone name>". "Number please" followed by
a tone.
3. Say the entire number without pausing.
•
If the system recognizes the number, it responds
with "OK, Dialing" and dials the number.
•
If the system does not recognize the number,
it confirms the numbers followed by a tone.
If the number is correct, say "Yes". The system
responds with "OK, Dialing" and dials the number.
If the number is not correct, say "No". The system
will ask for the number to be re-entered.
Using the Digit Dial Command
b g
1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Digit Dial". The system responds with "Digit
dial using <phone name>, please say the first digit
to dial" followed by a tone.
3. Say the digit to be dialed one at a time. Following
each digit, the system will repeat back the digit it
heard followed by a tone.
for two seconds. The system
for two seconds. The system
4-79