Pairing A Phone - Chevrolet HHR 2011 Owner's Manual

Pairing a Phone

1. Press and hold
2. Say Bluetooth .
3. Say Pair . The system responds with instructions
and a four digit PIN number. The PIN number is
used in Step 5.
4. Start the pairing process on the cell phone that you
want to pair. For help with this process, see your
cell phone manufacturers user guide.
5. Locate the device named Your Vehicle in the list
on the cell phone. Follow the instructions on the
cell phone to enter the PIN number that was
provided in Step 3. After the PIN number is
successfully entered, the system prompts you to
provide a name for the paired cell phone. This
name will be used to indicate which phones are
paired and connected to the vehicle, see Listing
All Paired and Connected Phones later in this
section for more information.
6. Repeat Steps 1 through 5 to pair additional
phones.
g
for two seconds.
Listing All Paired and Connected Phones
The system can list all cell phones paired to it. If a
paired cell phone is also connected to the vehicle, the
system responds with is connected after that
phone name.
1. Press and hold
2. Say Bluetooth .
3. Say List .
Deleting a Paired Phone
If the phone name you want to delete is unknown, see
Listing All Paired and Connected Phones .
1. Press and hold
2. Say Bluetooth .
3. Say Delete . The system asks for which phone to
delete.
4. Say the name of the phone you want to delete.
g
for two seconds.
g
for two seconds.
4-73