Chevrolet 2010 Impala Owner's Manual

Chevrolet 2010 Impala Owner's Manual

Hide thumbs Also See for 2010 Impala:
Table of Contents

Advertisement

2010 Chevrolet Impala Owner Manual
In Brief ........................................................... 1-1
........................................ 1-2
...................................... 1-15
Seats and Restraint System ............................. 2-1
......................................... 2-2
............................................... 2-4
.............................................. 2-10
............................................. 2-12
....................................... 2-32
Airbag System
......................................... 2-56
Restraint System Check
Features and Controls ..................................... 3-1
........................................................ 3-3
Doors and Locks
....................................... 3-9
................................................. 3-14
Theft-Deterrent Systems
Starting and Operating Your Vehicle
Mirrors
.................................................... 3-33
............................... 1-4
................... 1-19
............................ 2-74
............................ 3-16
........... 3-19
Universal Home Remote System
......................................... 3-42
.................................................. 3-43
Instrument Panel ............................................. 4-1
Instrument Panel Overview
Climate Controls
...................................... 4-16
Warning Lights, Gages, and Indicators
Driver Information Center (DIC)
Audio System(s)
....................................... 4-57
Driving Your Vehicle ....................................... 5-1
Your Driving, the Road, and the Vehicle
Towing
................................................... 5-26
Service and Appearance Care .......................... 6-1
Service
..................................................... 6-3
Fuel
......................................................... 6-5
Checking Things Under the Hood
Headlamp Aiming
..................................... 6-43
Bulb Replacement
Windshield Wiper Blade Replacement
M
................ 3-35
.......................... 4-3
........ 4-21
.................. 4-37
....... 5-2
............... 6-12
.................................... 6-43
......... 6-49

Advertisement

Table of Contents
loading

Summary of Contents for Chevrolet 2010 Impala

  • Page 1: Table Of Contents

    2010 Chevrolet Impala Owner Manual In Brief ... 1-1 Instrument Panel ... 1-2 Initial Drive Information ... 1-4 Vehicle Features ... 1-15 Performance and Maintenance Seats and Restraint System ... 2-1 Head Restraints ... 2-2 Front Seats ... 2-4 Rear Seats ...
  • Page 2 Tires ... 6-51 Appearance Care ... 6-87 Vehicle Identification ... 6-95 Electrical System ... 6-95 Capacities and Specifications Maintenance Schedule ... 7-1 Maintenance Schedule ... 7-2 Customer Assistance Information ... 8-1 Customer Assistance and Information Reporting Safety Defects Vehicle Data Recording and Privacy ...
  • Page 3: Canadian Owners

    For vehicles first sold in Canada, substitute the name ‘‘General Motors of Canada Limited’’ for Chevrolet Motor Division wherever it appears in this manual. Keep this manual in the vehicle for quick reference.
  • Page 4: Vehicle Symbols

    Safety Warnings and Symbols Warning Messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them. Danger indicates a hazard with a high level of risk which will result in serious injury or death. Warning or Caution indicates a hazard that could result in injury or death.
  • Page 5: Vehicle Symbol Chart

    Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index. : Airbag Readiness Light : Air Conditioning : Antilock Brake System (ABS) : Audio Steering Wheel Controls or OnStar : Brake System Warning Light "...
  • Page 6 ✍ NOTES...
  • Page 7: In Brief

    Instrument Panel ...1-2 Initial Drive Information ...1-4 Remote Keyless Entry (RKE) System ...1-4 Remote Vehicle Start ...1-4 Door Locks ...1-5 Trunk Release ...1-5 Windows ...1-6 Seat Adjustment ...1-6 Second Row Seats ...1-8 Head Restraint Adjustment ...1-8 Safety Belt ...1-9 Sensing System for Passenger Airbag ...1-9 Mirror Adjustment ...1-10 Steering Wheel Adjustment ...1-11 Interior Lighting ...1-11...
  • Page 8: Instrument Panel

    Instrument Panel...
  • Page 9 A. Outlet Adjustment on page 4-20. B. Remote Trunk Release Button. See Trunk on page 3-12. C. Turn Signal/Multifunction Lever on page 4-4. D. Instrument Panel Cluster on page 4-22. E. Hazard Warning Flashers on page 4-3. F. Driver Information Center (DIC) on page 4-37. G.
  • Page 10: Initial Drive Information

    Initial Drive Information This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can be found later in this owner manual. Remote Keyless Entry (RKE) System The RKE transmitter is used to remotely lock and...
  • Page 11 The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once. Canceling a Remote Start To cancel a remote start: • Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off.
  • Page 12: Seat Adjustment

    Windows On vehicles with power windows, the switches are on the driver door armrest. Each passenger door has a switch that controls only that window. Press the front of the switch to the first position to open the window. Pull the switch up to close it. For more information, see Power Windows on page 3-15.
  • Page 13: Power Seats

    Power Seats Move the seat forward or rearward by moving the control forward or rearward. Raise or lower the front or rear of the seat cushion by moving the front or rear of the control up or down. See Power Seats on page 2-5. Power Reclining Seatback To raise or recline the seatback, tilt the top of the control forward or rearward.
  • Page 14: Second Row Seats

    Manual Lumbar Increase or decrease the lumbar support by repeatedly pushing down or pulling up on the lever. See Manual Lumbar on page 2-5. Second Row Seats On vehicles with the Flip and Fold feature, the bottom seat cushions can be flipped forward and the seatback folded down to create an extended cargo area.
  • Page 15: Safety Belt

    Safety Belt Refer to the following sections for important information on how to use safety belts properly. • Safety Belts: They Are for Everyone on page 2-12. • How to Wear Safety Belts Properly on page 2-17. • Lap-Shoulder Belt on page 2-25. •...
  • Page 16 Mirror Adjustment Exterior Mirrors Controls for the outside power mirrors are located on the driver door armrest. Press the left or right side of the selector located beneath the control pad to adjust the driver or passenger mirror. Then press the control pad to move the mirror to the desired direction.
  • Page 17: Steering Wheel Adjustment

    Steering Wheel Adjustment The tilt wheel lever is located on the left side of the steering column. To adjust the steering wheel: 1. Hold the wheel and pull the lever towards you. 2. Move the steering wheel up or down into a comfortable position.
  • Page 18: Exterior Lighting

    Exterior Lighting The exterior lamps control is located on the instrument panel to the left of the steering wheel. : Briefly turn to this position to manually turn the automatic lamp control and Daytime Running Lamps (DRL) off or on. For vehicles first sold in Canada, the off position only works when the vehicle is shifted into the P (Park) position.
  • Page 19: Windshield Wiper/Washer

    Windshield Wiper/Washer The lever is located on the left side of the steering column. : Use for a single wiping cycle. : Turns the windshield wipers off. : Turn the band up for more frequent wipes or down for less frequent wipes. : Slow wipes.
  • Page 20: Climate Controls

    Climate Controls This vehicle may have a dual or single climate control system. The heating, cooling, defrost, defog and ventilation can be controlled with either of these systems. Dual Zone with Optional Heated Seat Controls A. Fan Control G. Driver and B.
  • Page 21: Vehicle Features

    Vehicle Features Radio(s) Radio with CD (MP3) : Press to turn the system on and off. Turn to increase or decrease the volume. BAND: Press to switch between FM1, FM2 and AM on the Radio with CD. The selection displays. Press to switch between FM, AM, and XM™...
  • Page 22: Portable Audio Devices

    Setting the Clock To set the time and date for the Radio with CD (MP3): 1. Turn the radio on. 2. Press and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) displays. 3. Press the pushbutton located below any one of the tabs that you want to change.
  • Page 23: Steering Wheel Controls

    Steering Wheel Controls If equipped, these controls are located on the right side of the steering wheel. : Press to go to the next radio station stored as a favorite, or the next track if a CD is playing. : Press to silence the vehicle speakers only. Press again to turn the sound on.
  • Page 24 Cruise Control The cruise control buttons are located on the left side of the steering wheel. : On/Off. RES+: Press to resume or accelerate speed. SET−: Press to set or decrease speed. : Press to cancel cruise control. For more information, see Cruise Control on page 4-6. 1-18 Power Outlets The vehicle has three 12-volt outlets to use with...
  • Page 25: Performance And Maintenance

    Performance and Maintenance Traction Control System (TCS) The vehicle may have a traction control system limits wheel spin. The system turns on automatically every time the vehicle is started. • For vehicles with traction control, press and release on the instrument panel to turn off traction control.
  • Page 26 Tire Pressure Monitor This vehicle may have a Tire Pressure Monitor System (TPMS). The Tire Pressure Monitor alerts you when a significant reduction in pressure occurs in one or more of the vehicle’s tires by illuminating the low tire pressure warning light on the instrument cluster.
  • Page 27: Driving For Better Fuel Economy

    U.S.: 1-800-CHEV-USA (1-800-243-8872) TTY Users: 1-888-889-2438 Canada: 1-800-268-6800 As the owner of a new Chevrolet, you are automatically enrolled in the Roadside Assistance program. This program provides technically trained advisors who are available 24 hours a day, 365 days a year, minor repair information or towing arrangements.
  • Page 28: How Onstar Service Works

    ® OnStar ® OnStar uses several innovative technologies and live advisors to provide a wide range of safety, security, navigation, diagnostics, and calling services. Automatic Crash Response In a crash, built in sensors can automatically alert an OnStar advisor who is immediately connected to the vehicle to see if you need help.
  • Page 29: Onstar Steering Wheel Controls

    The OnStar system can record and transmit vehicle information. This information is automatically sent to an OnStar call center when is pressed, if the airbags or ACR system deploy. This information usually includes the vehicle’s GPS location and, in the event of a crash, additional information regarding the crash that the vehicle was involved in (e.g.
  • Page 30 ✍ NOTES 1-24...
  • Page 31: Seats And Restraint System

    Section 2 Head Restraints ...2-2 Front Seats ...2-4 Manual Seats ...2-4 Power Seats ...2-5 Manual Lumbar ...2-5 Heated Seats ...2-6 Reclining Seatbacks ...2-6 Center Seat ...2-9 Rear Seats ...2-10 Split Folding Rear Seat ...2-10 Safety Belts ...2-12 Safety Belts: They Are for Everyone ...2-12 How to Wear Safety Belts Properly ...2-17 Lap-Shoulder Belt ...2-25 Safety Belt Use During Pregnancy ...2-30...
  • Page 32: Head Restraints

    Head Restraints The front seats have adjustable head restraints in the outboard seating positions. WARNING: With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
  • Page 33 Pull the head restraint up to raise it. To lower the head restraint, press the button, located on the top of the seatback, and push the restraint down. Push down on the head restraint after the button is released to make sure that it is locked in place. The head restraints are not designed to be removed.
  • Page 34: Front Seats

    Front Seats Manual Seats WARNING: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
  • Page 35: Manual Lumbar

    Power Seats Driver Seat with Manual Lumbar, Power Seat Control, and Power Recline shown On vehicles with power seats, the controls used to operate them are located on the outboard side of the seats. To adjust the seat: • Move the seat forward or rearward by sliding the control forward or rearward.
  • Page 36: Heated Seats

    Heated Seats On vehicles with this feature, the buttons that control the driver and front passenger heated seats are located on the climate control panel. See Climate Control System on page 4-16. Press the button to turn on the seat at the high setting. Both lights below the heated seat symbol are lit.
  • Page 37 Passenger Seat with Manual Recline and Power Seat Control shown To operate a manual reclining seatback: 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked.
  • Page 38 Power Reclining Seatback Driver Seat with Manual Lumbar, Power Seat Control, and Power Recline shown The driver seat may have a power reclining seatback. The control used to operate it is located on the outboard side of the seat cushion rear of the horizontal power seat control.
  • Page 39: Center Seat

    Do not have a seatback reclined if the vehicle is moving. Center Seat The vehicle may have a front center seat. There are cupholders on the underside of the seat cushion. To use them, flip the seat cushion forward. The seat can also be used as a storage area by lowering the seatback.
  • Page 40: Rear Seats

    Rear Seats Split Folding Rear Seat Flip and Fold Feature On vehicles with this feature, you can flip the bottom seat cushion(s) forward and fold the seatback(s) down to create an extended flat cargo area. To use this feature: 1. Make sure the front seats are not reclined. If they are, the seat cushion will not flip forward completely.
  • Page 41 3. Lower the seatback(s) by pulling forward on the tab located on the outboard side of the seatback(s). To return the seats to the normal position: WARNING: If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there.
  • Page 42: Safety Belts

    Safety Belts Safety Belts: They Are for Everyone This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts. WARNING: Do not let anyone ride where a safety belt cannot be worn properly.
  • Page 43: Why Safety Belts Work

    Why Safety Belts Work When you ride in or on anything, you go as fast as it goes. Put someone on it. Take the simplest vehicle. Suppose it is just a seat on wheels. 2-13...
  • Page 44 Get it up to speed. Then stop the vehicle. The rider does not stop. 2-14 The person keeps going until stopped by something. In a real vehicle, it could be the windshield...
  • Page 45 or the instrument panel... or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. 2-15...
  • Page 46 Questions and Answers About Safety Belts Will I be trapped in the vehicle after a crash if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.
  • Page 47: How To Wear Safety Belts Properly

    How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children on page 2-32 or Infants and Young Children on page 2-35.
  • Page 48 What is wrong with this? The shoulder belt is too loose. It will not give as much protection this way. 2-18 WARNING: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
  • Page 49 What is wrong with this? The lap belt is too loose. It will not give nearly as much protection this way. WARNING: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen.
  • Page 50 What is wrong with this? The belt is buckled in the wrong buckle. 2-20 WARNING: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones.
  • Page 51 What is wrong with this? The belt is over an armrest. WARNING: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries.
  • Page 52 What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. 2-22 WARNING: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
  • Page 53 What is wrong with this? The belt is behind the body. WARNING: You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury.
  • Page 54 What is wrong with this? The belt is twisted across the body. 2-24 WARNING: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it.
  • Page 55: Lap-Shoulder Belt

    Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder except for the center front passenger position, if your vehicle has one, which has a lap belt. See Lap Belt on page 2-30 for more information. The following instructions explain how to wear a lap-shoulder belt properly.
  • Page 56 4. If equipped with a shoulder belt height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjustment” later in this section for instructions on use and important safety information. 5. To make the lap part tight, pull up on the shoulder belt.
  • Page 57: Rear Safety Belt Comfort Guides

    Shoulder Belt Height Adjuster The vehicle has shoulder belt height adjusters for the driver and right front passenger positions. Adjust the height so that the shoulder portion of the belt is centered on the shoulder. The belt should be away from the face and neck, but not falling off the shoulder.
  • Page 58 Here is how to install a comfort guide to the safety belt: 1. Pull the guide out from the pocket on the edge of the seatback. 2. Place the guide over the belt, and insert the two edges of the belt into the slots of the guide. 2-28 3.
  • Page 59 WARNING: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 60: Safety Belt Use During Pregnancy

    Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
  • Page 61: Safety Belt Extender

    To make the belt shorter, pull its free end as shown until the belt is snug. If the belt is not long enough, see Safety Belt Extender on page 2-31. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if necessary.
  • Page 62: Child Restraints

    Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. 2-32 The manufacturer’s instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below fit test: •...
  • Page 63 What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
  • Page 64 WARNING: Never do this. Never allow a child to wear the safety belt with the shoulder belt behind their back. A child can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, the child would not be restrained by the shoulder belt.
  • Page 65: Infants And Young Children

    Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
  • Page 66 WARNING: Never do this. Never hold an infant or a child while riding in a vehicle. Due to crash forces, an infant or a child will become so heavy it is not possible to hold it during a crash. For example, in a crash at only 40 km/h (25 mph), a 5.5 kg (12 lb) infant will suddenly become a 110 kg (240 lb) force on a person’s arms.
  • Page 67 WARNING: Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat.
  • Page 68 What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
  • Page 69: Child Restraint Systems

    WARNING: A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that is unprotected by any bony structure.
  • Page 70: Windows

    A forward-facing child seat (B) provides restraint for the child’s body with the harness. 2-40 A booster seat (C-D) is a child restraint designed to improve the fit of the vehicle’s safety belt system. A booster seat can also help a child to see out the window.
  • Page 71: Securing The Child Within The Child Restraint

    Securing an Add-On Child Restraint in the Vehicle WARNING: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.
  • Page 72: Where To Put The Restraint

    Where to Put the Restraint According to accident statistics, children and infants are safer when properly restrained in a child restraint system or infant restraint system secured in a rear seating position. We recommend that children and child restraints be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint;...
  • Page 73: Lower Anchors And Tethers For Children (Latch)

    WARNING: A child in a child restraint in the center front seat can be badly injured or killed by the frontal airbags if they inflate. Never secure a child restraint in the center front seat. It is always better to secure a child restraint in a rear seat.
  • Page 74: Top Tether Anchor

    Lower Anchors Lower anchors (A) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (B). 2-44 Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle.
  • Page 75 Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached.
  • Page 76: Securing A Child Restraint Designed For The Latch System

    The top tether anchors are located under the covers on the rear seatback filler panel behind each head restraint. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.
  • Page 77 WARNING: Do not attach more than one child restraint to a single anchor. Attaching more than one child restraint to a single anchor could cause the anchor or attachment to come loose or even break during a crash. A child or others could be injured. To reduce the risk of serious or fatal injuries during a crash, attach only one child restraint per anchor.
  • Page 78 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2.
  • Page 79: Securing A Child Restraint In A Rear Seat Position

    Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with the child restraint to make sure it is compatible with this vehicle. If the child restraint has the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 2-43 for how and where to install the child restraint using LATCH.
  • Page 80 3. Push the latch plate into the buckle until it clicks. 4. Pull the rest of the shoulder belt all the way out of the retractor to set the lock. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
  • Page 81 5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt.
  • Page 82: Securing A Child Restraint In The Right Front Seat Position

    Securing a Child Restraint in the Center Front Seat Position WARNING: A child in a child restraint in the center front seat can be badly injured or killed by the frontal airbags if they inflate. Never secure a child restraint in the center front seat.
  • Page 83 WARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position.
  • Page 84 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 4. Push the latch plate into the buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
  • Page 85 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. When installing a forward-facing child restraint, it may be helpful to use your knee to push down on the child restraint as you tighten the belt.
  • Page 86 Airbag System The vehicle has the following airbags: • A frontal airbag for the driver. • A frontal airbag for the right front passenger. • A seat-mounted side impact airbag for the driver. • A seat-mounted side impact airbag for the right front passenger.
  • Page 87 Here are the most important things to know about the airbag system: WARNING: You can be severely injured or killed in a crash if you are not wearing your safety belt — even if you have airbags. Airbags are designed to work with safety belts, but do not replace them.
  • Page 88 WARNING: Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
  • Page 89: Where Are The Airbags

    Where Are the Airbags? The driver’s frontal airbag is in the middle of the steering wheel. The right front passenger frontal airbag is in the instrument panel on the passenger side. 2-59...
  • Page 90 Driver Side shown, Passenger Side similar The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door. 2-60 Driver Side shown, Passenger Side similar The roof-rail airbags for the driver, right front passenger, and second row outboard passengers are in the ceiling above the side windows.
  • Page 91: When Should An Airbag Inflate

    WARNING: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag...
  • Page 92 Frontal airbags may inflate at different crash speeds. For example: • If the vehicle hits a stationary object, the airbags could inflate at a different crash speed than if the vehicle hits a moving object. • If the vehicle hits an object that deforms, the airbags could inflate at a different crash speed than if the vehicle hits an object that does not deform.
  • Page 93: What Makes An Airbag Inflate

    What Makes an Airbag Inflate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and deploy. The inflator, the airbag, and related hardware are all part of the airbag module.
  • Page 94: What Will You See After An Airbag Inflates

    What Will You See After an Airbag Inflates? After the frontal airbags and seat-mounted side impact airbags inflate, they quickly deflate, so quickly that some people may not even realize an airbag inflated. Roof-rail airbags may still be at least partially inflated for some time after they deploy.
  • Page 95 WARNING: A crash severe enough to inflate the airbags may have also damaged important functions in the vehicle, such as the fuel system, brake and steering systems, etc. Even if the vehicle appears to be drivable after a moderate crash, there may be concealed damage that could make it difficult to safely operate the vehicle.
  • Page 96: Passenger Sensing System

    Passenger Sensing System The vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator will be visible on the instrument panel when the vehicle is started. United States The words ON and OFF, or the symbol for on and off, will be visible during the system check.
  • Page 97 WARNING: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating airbag. A child in a forward-facing child restraint can be seriously injured or killed if the right front passenger airbag inflates and the passenger seat is in a forward position.
  • Page 98 The passenger sensing system is designed to turn on (may inflate) the right front passenger frontal airbag anytime the system senses that a person of adult size is sitting properly in the right front passenger seat. When the passenger sensing system has allowed the airbag to be enabled, the on indicator will light and stay lit to remind you that the airbag is active.
  • Page 99 If the On Indicator is Lit for a Child Restraint If a child restraint has been installed and the on indicator is lit: 1. Turn the vehicle off. 2. Remove the child restraint from the vehicle. 3. Remove any additional items from the seat such as blankets, cushions, seat covers, seat heaters, or seat massagers.
  • Page 100 If the Off Indicator is Lit for an Adult-Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. 2-70 If this happens, use the following steps to allow the system to detect that person and enable the right front...
  • Page 101 Additional Factors Affecting System Operation Safety belts help keep the passenger in position on the seat during vehicle maneuvers and braking, which helps the passenger sensing system maintain the passenger airbag status. See “Safety Belts” and “Child Restraints” in the Index for additional information about the importance of proper restraint use.
  • Page 102: Servicing Your Airbag-Equipped Vehicle

    If the passenger seat gets wet, dry the seat immediately. If the airbag readiness light is lit, do not install a child restraint or allow anyone to occupy the seat. See Airbag Readiness Light on page 4-24 for important safety information.
  • Page 103 Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? Yes. If you add things that change the vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
  • Page 104: Checking The Restraint Systems

    Restraint System Check Checking the Restraint Systems Safety Belts Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors, and anchorages are all working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job.
  • Page 105: Replacing Restraint System Parts After A Crash

    Replacing Restraint System Parts After a Crash WARNING: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as...
  • Page 106 ✍ NOTES 2-76...
  • Page 107 Section 3 Keys ...3-3 Remote Keyless Entry (RKE) System ...3-4 Remote Keyless Entry (RKE) System Operation ...3-4 Remote Vehicle Start ...3-7 Doors and Locks ...3-9 Door Locks ...3-9 Power Door Locks ...3-10 Delayed Locking ...3-10 Automatic Door Lock ...3-10 Programmable Automatic Door Unlock ...3-11 Rear Door Security Locks ...3-11 Lockout Protection ...3-12 Trunk ...3-12...
  • Page 108 Section 3 Storage Areas ...3-42 Glove Box ...3-42 Cupholders ...3-42 Sunglasses Storage Compartment ...3-42 Center Console Storage ...3-42 Features and Controls Rear Storage Area ...3-42 Rear Seat Armrest ...3-42 Convenience Net ...3-42 Sunroof ...3-43...
  • Page 109: Keys

    Keys WARNING: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window.
  • Page 110: Remote Keyless Entry (Rke) System

    Remote Keyless Entry (RKE) System See Radio Frequency Statement on page 8-20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment.
  • Page 111 (Lock): Press to lock all the doors. If enabled through the Driver Information Center (DIC), the parking lamps flash once to indicate locking has occurred. If enabled through the DIC, the horn chirps when within five seconds. See DIC Vehicle Customization on page 4-51 for additional information.
  • Page 112: Battery Replacement

    Battery Replacement Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC. See “REPLACE BATTERY IN REMOTE KEY” under DIC Warnings and Messages on page 4-44 for additional information. Notice: When replacing the battery, do not touch any of the circuitry on the transmitter.
  • Page 113: Remote Vehicle Start

    Remote Vehicle Start Your vehicle may have a remote starting feature that allows you to start the engine from outside the vehicle. It may also start the vehicle’s heating or air conditioning systems and rear window defogger. When the remote start system is active and the vehicle has an automatic climate control system, it will automatically regulate the inside temperature.
  • Page 114 The engine will shut off automatically after 10 minutes, unless a time extension has been done or the vehicle’s key is inserted into the ignition switch and turned to ON/RUN. To manually shut off a remote start, do any of the following.
  • Page 115: Doors And Locks

    Doors and Locks Door Locks WARNING: Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked.
  • Page 116: Power Door Locks

    Power Door Locks A power door lock switch is located on both front doors next to the door handle. Press the top of the switch to unlock all doors or press the bottom of the switch to lock all doors. If the vehicle has the optional content theft-deterrent system and it is armed, the power door lock switches will be disabled.
  • Page 117: Programmable Automatic Door Unlock

    Programmable Automatic Door Unlock The vehicle is programmed so that when the shift lever is moved into P (Park) all doors will unlock. With the vehicle stopped and the engine running, door unlocking can be programmed through prompts displayed on the Driver Information Center (DIC). These prompts allow the driver to choose various unlock settings.
  • Page 118: Lockout Protection

    To open a rear door when the security lock is on, do the following: 1. Unlock the door using the Remote Keyless Entry (RKE) transmitter, if the vehicle has one, the power door lock switch, or by lifting the rear door manual lock.
  • Page 119: Remote Trunk Release

    Trunk Release To open the trunk from the outside, press the trunk release button on the RKE transmitter, if equipped. Remote Trunk Release (Remote Trunk Release): Press the button located next to the exterior lamps control on the left side of the instrument panel to open the trunk.
  • Page 120: Windows

    Windows WARNING: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 121: Power Windows

    Power Windows WARNING: Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closing window.
  • Page 122: Sun Visors

    Express-Down Window The driver window switch has an express-down feature labeled AUTO. This lets you lower the window completely without holding the switch. Press the front of the switch to the second position and release. To stop the window while it is lowering, briefly pull up on the switch.
  • Page 123: Content Theft-Deterrent

    Content Theft-Deterrent Your vehicle may have the optional content theft-deterrent alarm system. To activate the theft-deterrent system: 1. Open the door. 2. Lock the door with the power door lock switch or the Remote Keyless Entry (RKE) transmitter. If you are using the RKE transmitter, the door does not need to be open.
  • Page 124: Pass-Key Iii+ Electronic Immobilizer

    ® PASS-Key III+ Electronic Immobilizer See Radio Frequency Statement on page 8-20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. ® PASS-Key III+ Electronic Immobilizer Operation ® Your vehicle has PASS-Key III+ (Personalized Automotive Security System) theft-deterrent system.
  • Page 125: Starting And Operating Your Vehicle

    See your dealer/retailer or a locksmith who can service ® PASS-Key III+ to get a new key blank that is cut exactly as the ignition key that operates the system. To program the new additional key: 1. Verify that the new key has a 2.
  • Page 126: Ignition Positions

    Ignition Positions The ignition switch has four different positions. To shift out of P (Park), the ignition must be in ON/RUN and the brake pedal must be applied. Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key.
  • Page 127: Retained Accessory Power (Rap)

    D (START): This is the position that starts the engine. When the engine starts, release the key. The ignition switch returns to ON/RUN for driving. A warning chime will sound and the Driver Information Center (DIC) will display DRIVER’S DOOR AJAR when the driver door is opened, the ignition is in ACC/ACCESSORY or LOCK/OFF and the key is in the ignition.
  • Page 128: Starting Procedure

    Starting Procedure 1. With your foot off the accelerator pedal, turn the ignition to START. When the engine starts, let go of the key. The idle speed will slow down as the engine warms. Do not race the engine immediately after starting it.
  • Page 129: Engine Coolant Heater

    Engine Coolant Heater The engine coolant heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below 0°F (−18°C). Vehicles with an engine coolant heater should be plugged in at least four hours before starting. To Use the Engine Coolant Heater 1.
  • Page 130: Automatic Transmission Operation

    Automatic Transmission Operation The automatic transmission has a shift lever on the steering column or on the console between the seats. There is a display, located on the instrument panel cluster that will indicate the gear the vehicle is in. Maximum engine speed is limited on automatic transmission vehicles while in P (Park) or N (Neutral) to protect driveline components from improper operation.
  • Page 131 R (Reverse): Use this gear to back up. Notice: Shifting to R (Reverse) while the vehicle is moving forward could damage the transmission. The repairs would not be covered by the vehicle warranty. Shift to R (Reverse) only after the vehicle is stopped.
  • Page 132 Downshifting the transmission in slippery road conditions could result in skidding, see “Skidding” under Loss of Control on page 5-11. Notice: Driving the vehicle if you notice that it is moving slowly or not shifting gears as you increase speed may damage the transmission. Have the vehicle serviced right away.
  • Page 133: Parking Brake

    Parking Brake The parking brake is located to the left of the brake pedal, near the driver door. To set the parking brake, hold the brake pedal down, then push down the parking brake pedal. To release the parking brake, hold the brake pedal down and push the parking brake pedal.
  • Page 134: Shifting Into Park

    Shifting Into Park WARNING: It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
  • Page 135: Shifting Out Of Park

    Leaving the Vehicle With the Engine Running WARNING: It can be dangerous to leave the vehicle with the engine running. The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
  • Page 136: Parking Over Things That Burn

    The shift lock is always functional except in the case of a an uncharged or low voltage (less than 9 volt) battery. If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting on page 6-39.
  • Page 137: Engine Exhaust

    Engine Exhaust WARNING: Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: • The vehicle idles in areas with poor ventilation (parking garages, tunnels, deep snow that may block underbody airflow or tail pipes).
  • Page 138: Running The Vehicle While Parked

    Running the Vehicle While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. WARNING: Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle.
  • Page 139: Mirrors

    Mirrors Manual Rearview Mirror Hold the inside rearview mirror in the center to move it for a clearer view behind your vehicle. Adjust the mirror to avoid glare from the headlamps behind you. Pull the lever, located at the bottom of the mirror for nighttime use.
  • Page 140: Outside Power Mirrors

    Outside Power Mirrors Controls for the outside power mirrors are located on the driver door armrest. 1. Press the left or right side of the selector switch located beneath the control pad, to select the driver or passenger mirror. 2. Press one of the four buttons located on the control pad to move the mirror to the desired direction.
  • Page 141: Universal Home Remote System

    Universal Home Remote System See Radio Frequency Statement on page 8-20 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada. Universal Home Remote System Operation (With Three Round LED) This vehicle may have the Universal Home Remote System.
  • Page 142 Programming Universal Home Remote — Rolling Code For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold after 1996 are Rolling Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before starting.
  • Page 143 2. Locate in the garage, the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart” button. It can usually be found where the hanging antenna wire is attached to the motor-head unit and may be a colored button. Press this button.
  • Page 144 Programming Universal Home Remote — Fixed Code For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold before 1996 are Fixed Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before starting.
  • Page 145 The garage door opener receiver (motor head unit) could also have a row of dip switches that can be used when programming the Universal Home Remote. If the total number of switches on the motor head and hand held transmitter are different, or if the dip switch settings are different, use the dip switch settings on the motor head unit to program the Universal Home Remote.
  • Page 146 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
  • Page 147: Reprogramming Universal Home Remote Buttons

    5. After entering all of the switch positions, again, firmly press and release all three buttons at the same time. The indicator lights will turn on. 6. Press and hold the button that will be used to control the garage door until the garage door moves.
  • Page 148: Storage Areas

    Storage Areas Glove Box Lift up on the glove box lever to open it. Cupholders Cupholders may be built into the front center console, front portion of the front center seat, and rear armrest of the vehicle. Sunglasses Storage Compartment A storage compartment for sunglasses may be located above the rearview mirror.
  • Page 149: Sunroof

    Sunroof On vehicles with a sunroof, the sunroof switches are located on the overhead console. The sunroof can only be operated when the ignition is in ON/RUN, ACC/ACCESSORY, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 3-21. (Vent/Express-Open): Press this switch once to vent the sunroof when it is closed.
  • Page 150 ✍ NOTES 3-44...
  • Page 151 Section 4 Instrument Panel Overview ...4-3 Hazard Warning Flashers ...4-3 Horn ...4-3 Tilt Wheel ...4-3 Turn Signal/Multifunction Lever ...4-4 Turn and Lane-Change Signals ...4-4 Headlamp High/Low-Beam Changer ...4-5 Flash-to-Pass ...4-5 Windshield Wipers ...4-5 Windshield Washer ...4-6 Cruise Control ...4-6 Exterior Lamps ...4-9 Daytime Running Lamps (DRL)/Automatic Headlamp System ...4-10 Fog Lamps ...4-11...
  • Page 152 Section 4 Oil Pressure Light ...4-34 Security Light ...4-35 Fog Lamp Light ...4-35 Cruise Control Light ...4-35 Highbeam On Light ...4-36 Fuel Gage ...4-36 Driver Information Center (DIC) ...4-37 DIC Operation and Displays ...4-37 DIC Compass ...4-42 DIC Warnings and Messages ...4-44 DIC Vehicle Customization ...4-51 Instrument Panel Audio System(s) ...4-57...
  • Page 153: Instrument Panel Overview

    Instrument Panel Overview Hazard Warning Flashers The hazard warning flashers let you warn others that you have a problem. The hazard warning flasher button is located on top of the steering column. : Press to make the front and rear turn signal lamps flash on and off.
  • Page 154: Turn Signal/Multifunction Lever

    Turn Signal/Multifunction Lever The lever on the left side of the steering column includes the following: : Turn and Lane Change Signals : Headlamp High/Low-Beam Changer : Windshield Wipers : Windshield Washer Flash-to-Pass. For information on the headlamps, see Exterior Lamps on page 4-9.
  • Page 155: Headlamp High/Low-Beam Changer

    Turn Signal On Chime If either one of the turn signals are left on and the vehicle has been driven more than 3/4 mile (1.2 km), a chime will sound. Headlamp High/Low-Beam Changer To change the headlamps from low beam to high beam, push the turn signal/multifunction lever away from you.
  • Page 156: Windshield Washer

    Windshield Washer At the top of the multifunction lever, there is a paddle with on it. Push the paddle to spray washer fluid on the windshield. The wipers run for several sweeps and then either stop or return to the preset speed. The ignition key must be in ACC/ACCESSORY or ON/RUN for this to work.
  • Page 157: Setting Cruise Control

    The cruise control buttons are located on left side of the steering wheel. (On/Off): Press to turn cruise control on and off. The indicator is lit when cruise control is on. + RES (Resume/Accelerate): Press to make the vehicle accelerate or resume to a previously set speed. SET–...
  • Page 158 Resuming a Set Speed If cruise control is set at a desired speed and the brakes are applied, this shuts off the cruise control. However, it does not need to be reset. Once your vehicle reaches a speed of about 40 km/h (25 mph) or more, press the +RES button on the steering wheel.
  • Page 159: Exterior Lamps

    Ending Cruise Control There are three ways to end cruise control: • Step lightly on the brake pedal. • Press the button on the steering wheel. • Press the button on the steering wheel. Erasing Speed Memory The cruise control set speed memory is erased by turning off the cruise control or the ignition.
  • Page 160: Daytime Running Lamps (Drl)/Automatic Headlamp System

    (Parking Lamps): Turns on the parking lamps together with the following: • Instrument Panel Lights • Taillamps • License Plate Lamps (Headlamps): Turns on the headlamps together with the following lamps listed below. When the headlamps are turned on while the vehicle is on, the headlamps will turn off automatically 10 minutes after the ignition is turned off.
  • Page 161: Fog Lamps

    Fog Lamps (Fog Lamps): For vehicles with fog lamps, the button is located on the exterior lamps control. The exterior lamps control is located on the instrument panel to the left of the steering column. The ignition must be in the ON/RUN position for the fog lamps to come on.
  • Page 162: Entry Lighting

    Entry Lighting For vehicles with courtesy lamps, they come on and stay on for a set time whenever the unlock symbol is pressed on the Remote Keyless Entry (RKE) transmitter, if the vehicle has one. If a door is opened, the lamps stay on while it is open and then turn off automatically about 20 seconds after the door is closed.
  • Page 163: Delayed Exit Lighting

    Delayed Exit Lighting This feature illuminates the interior for a period of time after the key is removed from the ignition. The ignition must be off for delayed exit lighting to work. When the key is removed, interior illumination activates and remains on until one of the following occurs: •...
  • Page 164: Battery Run-Down Protection

    A high electrical load occurs when several of the following are on, such as: headlamps, high beams, fog lamps, rear window defogger, climate control fan at high speed, heated seats, engine cooling fans, trailer loads, and loads plugged into accessory power outlets. EPM works to prevent excessive discharge of the battery.
  • Page 165: Accessory Power Outlet(S)

    Accessory Power Outlet(s) The vehicle has three 12-volt outlets which can be used to plug in electrical equipment, such as a cellular telephone. On vehicles with a center console, one outlet is located inside the center floor console and two outlets are located at the front of the console bin under the instrument panel.
  • Page 166: Ashtray(S) And Cigarette Lighter

    Ashtray(s) and Cigarette Lighter The vehicle may have an ashtray and a cigarette lighter. The ashtray and cigarette lighter may be located in the console, if the vehicle has one, otherwise, they may be located in the center armrest of the front seat. Notice: If papers, pins, or other flammable items are put in the ashtray, hot cigarettes or other smoking materials could ignite them and possibly...
  • Page 167 Single Zone A. Fan Control E. Air Delivery Mode B. Outside Air C. Temperature Control F. Air Conditioning D. Recirculation G. Rear Window Temperature Control: For dual zone, turn the thumbwheels up or down to increase or decrease the temperature on the driver or the passenger side of the vehicle.
  • Page 168 (Floor): Air is directed to the floor outlets, with some of the air directed to the windshield and side window outlets. In this mode, the system automatically selects outside air. (Defog): This mode clears the windshield of fog or moisture. Air is directed equally to the windshield and the floor outlets.
  • Page 169: Rear Window Defogger

    Using these settings together for long periods of time may cause the air inside the vehicle to become too dry. To prevent this from happening, after the air inside the vehicle has cooled, turn the recirculation mode off. The air conditioning system removes moisture from the air, so a small amount of water may drip under the vehicle while idling or after turning off the engine.
  • Page 170: Outlet Adjustment

    Outlet Adjustment Use the thumbwheel located below or to the side of the outlet, to change the direction of the air flow. Operation Tips • Clear away any ice, snow or leaves from the air inlets at the base of the windshield that may block the flow of air into the vehicle.
  • Page 171: Warning Lights, Gages, And Indicators

    4. Remove the air inlet grille retainers. 5. Lift the air inlet grille and disconnect the washer hose at the quick-connect. 6. Remove the air inlet grille. 7. Remove the water deflector plate. 8. Remove the old passenger compartment air filter. 9.
  • Page 172: Instrument Panel Cluster

    Instrument Panel Cluster The instrument panel cluster is designed to show how the vehicle is running. It shows how fast the vehicle is going, about how much fuel has been used and many other things needed to drive safely and economically. United States Uplevel shown, Base and Canada similar 4-22...
  • Page 173: Speedometer And Odometer

    Speedometer and Odometer The speedometer shows the vehicle’s speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer shows how far the vehicle has been driven in either miles (used in the United States) or in kilometers (used in Canada). This vehicle has a tamper-resistant odometer.
  • Page 174: Airbag Readiness Light

    Passenger Safety Belt Reminder Light Several seconds after the engine is started, a chime sounds for several seconds to remind the front passenger to buckle their safety belt. This only occurs if the passenger airbag is enabled. See Passenger Sensing System on page 2-66 for more information. The passenger safety belt light, located on the instrument panel, comes on and stays on for several seconds and then flashes for several more.
  • Page 175: Passenger Airbag Status Indicator

    WARNING: If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash.
  • Page 176: Charging System Light

    If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the right front passenger frontal airbag is enabled (may inflate). If the word OFF or the off symbol is lit on the airbag status indicator, it means that the passenger sensing system has turned off the right front passenger frontal airbag.
  • Page 177: Brake System Warning Light

    Brake System Warning Light The vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking both parts need to be working well. If the warning light comes on, there is a brake problem.
  • Page 178: Antilock Brake System (Abs) Warning Light

    Antilock Brake System (ABS) Warning Light The Antilock Brake System (ABS) light comes on briefly when the engine is started. If it does not, have the vehicle serviced by your dealer/retailer. If the system is working normally the indicator light then goes off. If the ABS light stays on, turn the ignition off.
  • Page 179: Electronic Stability Control Indicator Light

    If the traction control system is manually turned off, this light comes on and the TRACTION CONTROL OFF message appears on the DIC. See Traction Control System (TCS) on page 5-7 and DIC Warnings and Messages on page 4-44 for more information.
  • Page 180: Engine Coolant Temperature Warning Light

    Engine Coolant Temperature Warning Light This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by the dealer/retailer. If the system is working normally the indicator light goes off. Notice: Driving with the engine coolant temperature warning light on could cause the vehicle to overheat.
  • Page 181: Tire Pressure Light

    Tire Pressure Light For vehicles with a tire pressure monitoring system, this light comes on briefly when the engine is started. It provides information about tire pressures and the Tire Pressure Monitoring System. When the Light is On Steady This indicates that one or more of the tires are significantly underinflated.
  • Page 182 If the check engine light comes on and stays on, while the engine is running, this indicates that there is an OBD II problem and service is required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle.
  • Page 183 Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. An emission system malfunction might be corrected by doing the following: • Make sure the fuel cap is fully installed. See Filling the Tank on page 6-10.
  • Page 184: Maintenance Schedule

    Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or might begin programs to inspect the emission control equipment on the vehicle. Failure to pass this inspection could prevent getting a vehicle registration. Here are some things to know to help the vehicle pass an inspection: •...
  • Page 185: Security Light

    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer/retailer. If the system is working normally the indicator light then goes off. If the light comes on and stays on, it means that oil is not flowing through the engine properly.
  • Page 186: Highbeam On Light

    Highbeam On Light This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 4-5 for more information. Fuel Gage United States When the ignition is on, the fuel gage indicates about how much fuel is left in the fuel tank. 4-36 An arrow on the fuel gage indicates the side of the vehicle the fuel door is on.
  • Page 187: Driver Information Center (Dic)

    Driver Information Center (DIC) Your vehicle has a Driver Information Center (DIC). All messages will appear in the DIC display located below the speedometer in the instrument panel cluster. The DIC buttons are located on the instrument panel, to the right of the instrument panel cluster. The DIC comes on when the ignition is on.
  • Page 188 (Vehicle Information): Press this button to display the oil life, units, tire pressure readings, compass zone and compass calibration on vehicles with this feature, and Remote Keyless Entry (RKE) transmitter programming. (Customization): Press this button to customize the feature settings on your vehicle. See DIC Vehicle Customization on page 4-51 for more information.
  • Page 189 If the retro-active reset feature is activated after the vehicle is started, but before it begins moving, the display will show the number of miles (mi) or kilometers (km) that were driven during the last ignition cycle. Fuel Range Press the trip/fuel button until FUEL RANGE displays. This display shows the approximate number of remaining miles (mi) or kilometers (km) the vehicle can be driven without refueling.
  • Page 190 Vehicle Information Menu Items (Vehicle Information): Press this button to scroll through the following menu items: Oil Life Press the vehicle information button until OIL LIFE REMAINING displays. This display shows an estimate of the oil’s remaining useful life. If you see 99% OIL LIFE REMAINING on the display, that means 99% of the current oil life remains.
  • Page 191 Change Compass Zone Your vehicle may have this feature. To change the compass zone through the DIC, see DIC Compass on page 4-42. Calibrate Compass Your vehicle may have this feature. The compass can be manually calibrated. To calibrate the compass through the DIC, see DIC Compass on page 4-42.
  • Page 192: Dic Compass

    DIC Compass Your vehicle may have a compass in the Driver Information Center (DIC). Compass Zone Your dealer/retailer will set the correct zone for your location. Under certain circumstances, such as during a long distance cross-country trip or moving to a new state or province, it will be necessary to compensate for compass variance by resetting the zone through the DIC if the zone is not set correctly.
  • Page 193: Compass Calibration

    Compass Calibration The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger. It is suggested to calibrate away from tall buildings, utility wires, manhole covers, or other industrial structures, if possible.
  • Page 194: Dic Warnings And Messages

    DIC Warnings and Messages Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another.
  • Page 195: Engine Overheated Stop Engine

    DRIVER DOOR OPEN This message displays when the driver door is not closed properly. Make sure that the door is closed completely. ENGINE HOT A/C (Air Conditioning) OFF This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor is automatically turned off.
  • Page 196: Oil Pressure Low Stop Engine

    ERROR This message displays while viewing the odometer or trip odometers if there is a problem with the instrument panel cluster. See your dealer/retailer for service. FUEL LEVEL LOW This message displays when your vehicle is low on fuel. Refill the fuel tank as soon as possible. See Fuel Gage on page 4-36 and Filling the Tank on page 6-10 for more information.
  • Page 197: Service Air Bag

    REMOTE KEY LEARNING ACTIVE This message displays while you are matching a Remote Keyless Entry (RKE) transmitter to your vehicle. See “Matching Transmitter(s) to Your Vehicle” under Remote Keyless Entry (RKE) System Operation on page 3-4 and DIC Operation and Displays on page 4-37 for more information.
  • Page 198: Service Tire Monitor System

    SERVICE POWER STEERING This message displays when a problem is detected with the power steering system. When this message is displayed, you may notice that the effort required to steer the vehicle increases or feels heavier, but you will still be able to steer the vehicle.
  • Page 199: Service Transmission

    SERVICE TRANSMISSION This message displays when there is a problem with the transmission. See your dealer/retailer for service. SERVICE VEHICLE SOON This message displays when a non-emissions related malfunction occurs. Have the vehicle serviced by your dealer/retailer as soon as possible. STABILITRAK NOT READY If your vehicle has Electronic Stability Control (ESC), this message may display and the ESC/TCS light on the...
  • Page 200: Trunk Open

    TIRE LOW ADD AIR TO TIRE On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle’s tires is low. This message also displays LEFT FRT (left front), RIGHT FRT (right front), LEFT RR (left rear), or RIGHT RR (right rear) to indicate the location of the low tire.
  • Page 201: Dic Vehicle Customization

    TURN SIGNAL ON This message displays as a reminder to turn off the turn signal if you drive your vehicle for more than about 0.75 mile (1.2 km) with a turn signal on. See Turn Signal/Multifunction Lever on page 4-4. This message displays and a chime sounds only when the ignition is in ON/RUN.
  • Page 202 Entering the Feature Settings Menu 1. Turn the ignition on and place the vehicle in P (Park). To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the customization button to enter the feature settings menu.
  • Page 203: Remote Door Lock

    AUTO DOOR UNLOCK This feature allows you to select whether or not to turn off the automatic door unlocking feature. It also allows you to select which doors and when the doors will automatically unlock. See Programmable Automatic Door Unlock on page 3-11 for more information. Press the customization button until AUTO DOOR UNLOCK appears on the DIC display.
  • Page 204: Exit Lighting

    To select a setting, press the set/reset button while the desired setting is displayed on the DIC. REMOTE DOOR UNLOCK This feature allows you to select the type of feedback you will receive when unlocking the vehicle with the Remote Keyless Entry (RKE) transmitter.
  • Page 205: Approach Lighting

    APPROACH LIGHTING This feature allows you to select whether or not to have the exterior lights turn on briefly during low light periods after unlocking the vehicle using the Remote Keyless Entry (RKE) transmitter. Press the customization button until APPROACH LIGHTING appears on the DIC display.
  • Page 206: Remote Start

    REMOTE START If your vehicle has this feature, it allows you to turn the remote start off or on. The remote start feature allows you to start the engine from outside of the vehicle using the Remote Keyless Entry (RKE) transmitter. See Remote Vehicle Start on page 3-7 for more information.
  • Page 207: Audio System(S)

    Exiting the Feature Settings Menu The feature settings menu will be exited when any of the following occurs: • The vehicle is shifted out of P (Park). • The vehicle is no longer in ON/RUN. • The trip/fuel or vehicle information DIC buttons are pressed.
  • Page 208: Setting The Clock

    Setting the Clock Without Date Display AM/FM Base Radio with a Single CD Player This radio has a button for setting the time. To set the time: 1. Press the button until the hour begins flashing on display. Press a second time and the minutes begin flashing on display.
  • Page 209: Radio(S)

    The date does not automatically display. To see the date press the button while the radio is on. The date with display times out after a few seconds and goes back to the normal radio and time display. To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year: 1.
  • Page 210: Playing The Radio

    Radio with CD (MP3) The vehicle has one of these radios as its audio system. 4-60 Radio Data System (RDS) The radio may have the Radio Data System (RDS) feature. RDS is available for use only on FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only works when the information is available.
  • Page 211: Finding A Station

    Speed Compensated Volume (SCV): The Radio with CD (MP3) has SCV. SCV automatically adjusts the radio volume to compensate for road and wind noise as the vehicle increases or decreases speed while driving. The volume level should sound about the same while driving. To activate SCV: 1.
  • Page 212: Storing A Radio Station As A Favorite

    Setting Preset Stations (Radio with CD) If the radio does not have XM, up to 18 stations (six FM1, six FM2, and six AM), can be programmed on the six numbered pushbuttons. To program presets: 1. Turn the radio on. 2.
  • Page 213: Adjusting The Speakers (Balance/Fade)

    Setting the Tone (Bass/Midrange/Treble) BASS/MID/TREB (Bass, Midrange, or Treble): The radio may display some or all tones, such as BASS, MID, and TREB. To adjust the tone settings, press the until the tone control tabs display. Press the softkey under the desired tab, then turn the or counterclockwise to adjust the highlighted setting.
  • Page 214: Radio Messages

    Finding a Category (CAT) Station (XM™ Satellite Radio Service Only) CAT (Category): The radio may have the CAT button feature. To select and find a desired category: 1. Press the BAND button until the XM frequency displays. Press the CAT button to display the category tabs on the radio display.
  • Page 215: Playing A Cd

    XM™ Satellite Radio Service XM is a satellite radio service that is based in the 48 contiguous United States and 10 Canadian provinces. XM Satellite Radio has a wide variety of programming and commercial-free music, coast-to-coast, and in digital-quality sound. A service fee is required to receive the XM service.
  • Page 216 RDM (Random): Tracks can be listened to in random, rather than sequential order. To use random on the Radio with CD, press the RDM button to play tracks from a CD in random order. The random icon displays. Press again to turn off random play.
  • Page 217 If the surface of a CD is soiled, take a soft, lint free cloth or dampen a clean, soft cloth in a mild, neutral detergent solution mixed with water, and clean it. Make sure the wiping process starts from the center to the edge.
  • Page 218: Using An Mp3

    Using the Auxiliary Input Jack The radio system has an auxiliary input jack located on the lower right side of the faceplate. This is not an audio output; do not plug the headphone set into the front auxiliary input jack. However, an external audio device such as an iPod, laptop computer, MP3 player, CD changer, or cassette tape player, etc.
  • Page 219 MP3 Format If you burn your own MP3 disc on a personal computer: • Make sure the MP3 files are recorded on a CD-R or CD-RW disc. • Do not mix standard audio and MP3 files on one disc. • The CD player is able to read and play a maximum of 50 folders, 50 playlists, and 255 files.
  • Page 220 Root Directory The root directory of the CD is treated as a folder. If the root directory has compressed audio files, the directory displays as F1 ROOT. All files contained directly under the root directory are accessed prior to any root directory folders.
  • Page 221 Preprogrammed Playlists Preprogrammed playlists that were created using WinAmp™, MusicMatch™, or Real Jukebox™ software can be accessed, however, you do not have playlist editing capability using the radio. These playlists are treated as special folders containing compressed audio song files. Playing an MP3 (Tune): Turn this knob to select MP3 files on the CD currently playing.
  • Page 222: Xm Radio Messages

    Once the disc has scanned, the player defaults to playing MP3 files in order by artist. The current artist playing is shown on the second line of the display between the arrows. Once all songs by that artist are played, the player moves to the next artist in alphabetical order on the CD and begins playing MP3 files by that artist.
  • Page 223 Channel Unavail: This previously assigned channel is no longer assigned. Tune to another station. If this station was one of the presets, choose another station for that preset button. No Artist Info: No artist information is available at this time on this channel. The system is working properly. No Title Info: No song title information is available at this time on this channel.
  • Page 224: Bluetooth

    ® Bluetooth Vehicles with a Bluetooth system can use a Bluetooth capable cell phone with a Hands Free Profile to make and receive phone calls. The system can be used while the key is in ON/RUN or ACC/ACCESSORY position. The range of the Bluetooth system can be up to 9.1 m (30 ft).
  • Page 225: Pairing A Phone

    Pairing A Bluetooth enabled cell phone must be paired to the in-vehicle Bluetooth system first and then connected to the vehicle before it can be used. See the cell phone manufacturers user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Calling, if available.
  • Page 226: Storing Name Tags

    Listing All Paired and Connected Phones 1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Bluetooth”. The system responds with “Bluetooth ready” followed by a tone. 3. Say “List”. The system lists all the paired Bluetooth devices.
  • Page 227 Using the Store Command The store command allows a phone number to be stored without entering the digits individually. 1. Press and hold for two seconds. The system responds with “Ready” followed by a tone. 2. Say “Store”. The system responds with “Store, number please”...
  • Page 228: Deleting Name Tags

    4. After the complete number has been entered, say “Store”. The system responds with “Please say the name tag” followed by a tone. 5. Say a name tag for the phone number. The name tag is recorded and the system responds with “About to store <name tag>.
  • Page 229: Making A Call

    Using the Delete All Name Tags Command The delete all name tags command deletes all stored phone book name tags and route name tags for OnStar (if present). To use the delete all name tags command: 1. Press and hold for two seconds.
  • Page 230: Using The Call Command

    4. Continue entering digits until the number to be dialed is complete. After the whole number has been entered, say “Dial”. The system responds with “OK, Dialing” and dials the number. • If an unwanted number is recognized by the system, say “Clear”...
  • Page 231: Receiving A Call

    Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. • Press and begin speaking to answer the call. • Press to ignore a call. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.
  • Page 232: Bluetooth System

    To Mute a call 1. Press . The system responds with “Ready” followed by a tone. 2. Say “Mute Call”. The system responds with “Call muted”. To Cancel Mute 1. Press . The system responds with “Ready” followed by a tone. 2.
  • Page 233 Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers and numbers stored as name tags during a call. This is used when calling a menu driven phone system. Account numbers can be programmed into the phonebook for retrieval during menu driven calls.
  • Page 234: Other Information

    Other Information ® The Bluetooth word mark and logos are owned by ® the Bluetooth SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 8-20 for FCC information.
  • Page 235: Radio Reception

    (Mute/Push to Talk): Press to silence the vehicle speakers only. Press again to turn the sound on. For ® vehicles with OnStar or Bluetooth hold for longer than two seconds to interact with those systems. See the OnStar Owner’s Guide and ®...
  • Page 236: Backglass Antenna

    Cellular Phone Usage Cellular phone usage may cause interference with the vehicle’s radio. This interference may occur when making or receiving phone calls, charging the phone’s battery, or simply having the phone on. This interference causes an increased level of static while listening to the radio.
  • Page 237 Section 5 Your Driving, the Road, and the Vehicle ...5-2 Defensive Driving ...5-2 Drunk Driving ...5-2 Control of a Vehicle ...5-3 Braking ...5-4 Antilock Brake System (ABS) ...5-5 Braking in Emergencies ...5-6 Electronic Stability Control (ESC) ...5-6 Traction Control System (TCS) ...5-7 Steering ...5-9 Off-Road Recovery ...5-11 Passing ...5-11...
  • Page 238: Your Driving, The Road, And The Vehicle

    Your Driving, the Road, and the Vehicle Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear your safety belt — See Safety Belts: They Are for Everyone on page 2-12. WARNING: Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes.
  • Page 239: Control Of A Vehicle

    Police records show that almost 40 percent of all motor vehicle-related deaths involve alcohol. In most cases, these deaths are the result of someone who was drinking and driving. In recent years, more than 17,000 annual motor vehicle-related deaths have been associated with the use of alcohol, with about 250,000 people injured.
  • Page 240: Braking

    Braking See Brake System Warning Light on page 4-27. Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average reaction time is about three-fourths of a second. But that is only an average.
  • Page 241: Antilock Brake System (Abs)

    Antilock Brake System (ABS) The vehicle might have the Antilock Brake System (ABS), an advanced electronic braking system that helps prevent a braking skid. If the vehicle has ABS, this warning light on the instrument panel cluster comes on briefly when the vehicle is started.
  • Page 242: Braking In Emergencies

    Using ABS Do not pump the brakes. Just hold the brake pedal down firmly and let antilock work. A slight brake pedal pulsation might be felt or some noise might be heard, but this is normal. Braking in Emergencies ABS allows the driver to steer and brake at the same time.
  • Page 243: Traction Control System (Tcs)

    If the vehicle is in cruise control when the system begins to assist the driver maintain directional control of the vehicle, the ESC/TCS light will flash and the cruise control will automatically disengage. When road conditions allow you to use cruise again, you may re-engage the cruise control.
  • Page 244 This light will flash when the TCS is limiting wheel spin. The system may be heard or felt while it is working, but this is normal. If cruise control is being used when TCS begins to limit wheel spin, the cruise control will automatically disengage.
  • Page 245: Steering

    To turn the system on or off, press the Traction Control button located on the instrument panel. When the system is turned off, the traction control warning light comes on and TRACTION CONTROL OFF appears on the DIC. If the traction control system is limiting wheel spin when the button is pressed to turn the system off, the warning light comes on and the system will turn off right away.
  • Page 246: Steering In Emergencies

    Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
  • Page 247: Off-Road Recovery

    Off-Road Recovery The vehicle’s right wheels can drop off the edge of a road onto the shoulder while driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that the vehicle straddles the edge of the pavement.
  • Page 248 Skidding In a skid, a driver can lose control of the vehicle. Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible. The three types of skids correspond to the vehicle’s three control systems.
  • Page 249: Driving At Night

    Driving at Night Night driving is more dangerous than day driving because some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Night driving tips include: • Drive defensively. • Do not drink and drive. •...
  • Page 250: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep-standing or flowing water. WARNING: Wet brakes can cause crashes.
  • Page 251: Before Leaving On A Long Trip

    Before Leaving on a Long Trip To prepare your vehicle for a long trip, consider having it serviced by your dealer/retailer before departing. Things to check on your own include: • Windshield Washer Fluid: Reservoir full? Windows clean — inside and outside? •...
  • Page 252: Hill And Mountain Roads

    Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: • Keep the vehicle serviced and in good shape. • Check all fluid levels and brakes, tires, cooling system, and transmission.
  • Page 253: Winter Driving

    Winter Driving Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction. Avoid driving on wet ice or in freezing rain until roads can be treated with salt or sand.
  • Page 254 Blizzard Conditions Being stuck in snow can be in a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the Roadside Assistance Program on page 8-7. To get help and keep everyone in the vehicle safe: •...
  • Page 255: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow

    Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps. If it takes some time for help to arrive, now and then when you run the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed.
  • Page 256: Rocking Your Vehicle To Get It Out

    Rocking Your Vehicle to Get It Out Turn the steering wheel left and right to clear the area around the front wheels. Turn off any traction system. Shift back and forth between R (Reverse) and a forward gear, spinning the wheels as little as possible. To prevent transmission wear, wait until the wheels stop spinning before shifting gears.
  • Page 257 Tire and Loading Information Label Label Example A vehicle specific Tire and Loading Information label is attached to the vehicle’s center pillar (B-pillar). With the driver door open, you will find the label attached below the door lock post (striker). The Tire and Loading Information label lists the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms...
  • Page 258 Steps for Determining Correct Load Limit Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
  • Page 259 Example 1 Item Description Maximum Vehicle Capacity Weight for Example 1 = Subtract Occupant Weight 150 lbs (68 kg) × 2 = Available Occupant and Cargo Weight = Total Item 1,000 lbs (453 kg) 300 lbs (136 kg) 700 lbs (317 kg) Example 2 Description Maximum Vehicle...
  • Page 260 Example 3 Item Description Maximum Vehicle Capacity Weight for Example 3 = Subtract Occupant Weight 200 lbs (91 kg) × 5 = Available Cargo Weight = Refer to your vehicle’s Tire and Loading Information label for specific information about your vehicle’s maximum vehicle capacity weight 5-24 and seating positions.
  • Page 261 Never exceed the GVWR for your vehicle or the Gross Axle Weight Rating (GAWR) for either the front or rear axle. If there is a heavy load, it should be spread out. WARNING: Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR).
  • Page 262: Towing

    Towing Towing Your Vehicle To avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Consult your dealer/retailer or a professional towing service if the disabled vehicle must be towed. See Roadside Assistance Program on page 8-7. To tow the vehicle behind another vehicle for recreational purposes, such as behind a motorhome, see “Recreational Vehicle Towing”...
  • Page 263: Dinghy Towing

    Dinghy Towing Notice: If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty. Do not tow the vehicle with all four wheels on the ground. The vehicle was not designed to be towed with all four wheels on the ground.
  • Page 264: Towing A Trailer

    6. Secure the vehicle to the dolly following the manufacturer’s instructions. 7. Release the parking brake only after the vehicle being towed is firmly attached to the towing vehicle. 8. Turn the ignition to LOCK/OFF and remove the key. Towing a Trailer WARNING: The driver can lose control when pulling a trailer if the correct equipment is not used or the vehicle is...
  • Page 265: Pulling A Trailer

    Pulling A Trailer Here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure the rig will be legal, not only where you live but also where you will be driving. A good source for this information can be state or provincial police.
  • Page 266: Weight Of The Trailer Tongue

    Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total gross weight of the vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle.
  • Page 267: Safety Chains

    Total Weight on the Vehicle’s Tires Be sure the vehicle’s tires are inflated to the upper limit for cold tires. These numbers can be found on the Certification/Tire label. See Loading the Vehicle on page 5-20. Make sure not to go over the GVW limit for the vehicle, including the weight of the trailer tongue.
  • Page 268: Driving With A Trailer

    Driving with a Trailer Towing a trailer requires a certain amount of experience. Get to know the rig before setting out for the open road. Get acquainted with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now longer and not as responsive as the vehicle is by itself.
  • Page 269: Turn Signals When Towing A Trailer

    Turn Signals When Towing a Trailer The arrows on the instrument panel flash whenever signaling a turn or lane change. Properly hooked up, the trailer lamps also flash, telling other drivers the vehicle is turning, changing lanes or stopping. When towing a trailer, the arrows on the instrument panel flash for turns even if the bulbs on the trailer are burned out.
  • Page 270: Engine Cooling When Trailer Towing

    Leaving After Parking on a Hill 1. Apply and hold the brake pedal while you: • start the engine, • shift into a gear, and • release the parking brake. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks. 4.
  • Page 271 Section 6 Service ...6-3 Accessories and Modifications ...6-3 California Proposition 65 Warning ...6-4 California Perchlorate Materials Requirements ...6-4 Doing Your Own Service Work ...6-4 Adding Equipment to the Outside of the Vehicle ...6-5 Fuel ...6-5 Gasoline Octane ...6-6 Gasoline Specifications ...6-6 California Fuel ...6-6 Additives ...6-7 Fuel E85 (85% Ethanol) ...6-8...
  • Page 272 Section 6 Tire Pressure Monitor System ...6-60 Tire Pressure Monitor Operation ...6-62 Tire Inspection and Rotation ...6-65 When It Is Time for New Tires ...6-67 Buying New Tires ...6-68 Different Size Tires and Wheels ...6-69 Uniform Tire Quality Grading ...6-70 Wheel Alignment and Tire Balance ...6-71 Wheel Replacement ...6-71 Tire Chains ...6-73...
  • Page 273: Service

    Service For service and parts needs, visit your dealer/retailer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: Accessories and Modifications When non-dealer/non-retailer accessories are added to the vehicle, they can affect vehicle performance and safety, including such things as airbags, braking, stability, ride and handling, emissions systems, aerodynamics, durability, and electronic systems like antilock brakes,...
  • Page 274: California Proposition 65 Warning

    California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals.
  • Page 275: Adding Equipment To The Outside Of The Vehicle

    This vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 2-72. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Record on page 7-13.
  • Page 276: Gasoline Octane

    Gasoline Octane Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be heard when driving. If this occurs, use a gasoline rated at 87 octane or higher as soon as possible.
  • Page 277: Additives

    Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that help prevent engine and fuel system deposits from forming, allowing the emission control system to work properly. In most cases, nothing should have to be added to the fuel. However, some gasolines contain only the minimum amount of additive required to meet U.S.
  • Page 278: Fuel E85 (85% Ethanol)

    Fuel E85 (85% Ethanol) The 8th digit of the Vehicle Identification Number (VIN) shows the code letter or number that identifies the vehicle’s engine. The VIN is at the top left of the instrument panel. See Vehicle Identification Number (VIN) on page 6-95. If the vehicle has the 3.5L V6 engine (VIN Code K) or the 3.9L V6 engine (VIN Code M), you can use either unleaded gasoline or ethanol fuel containing up to...
  • Page 279: Fuels In Foreign Countries

    E85 has less energy per gallon than gasoline, so you will need to refill the fuel tank more often when using E85 than when you are using gasoline. See Filling the Tank on page 6-10. Notice: Some additives are not compatible with E85 fuel and can harm the vehicle’s fuel system.
  • Page 280: Filling The Tank

    Filling the Tank WARNING: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling.
  • Page 281 WARNING: Fuel can spray out on you if you open the fuel cap too quickly. If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if the tank is nearly full, and is more likely in hot weather.
  • Page 282: Filling A Portable Fuel Container

    Filling a Portable Fuel Container WARNING: Never fill a portable fuel container while it is in the vehicle. Static electricity discharge from the container can ignite the fuel vapor. You can be badly burned and the vehicle damaged if this occurs.
  • Page 283: Hood Release

    Hood Release To open the hood, do the following: 1. Pull the interior hood release handle with this symbol on it. It is located to the left of the parking brake pedal. 2. Then go to the front of the vehicle and release the secondary hood latch, located near the center of the hood front, by pushing the latch to the right.
  • Page 284: Engine Compartment Overview

    Engine Compartment Overview When you open the hood on the 3.5L V6 engine (3.9L V6 similar), here is what you will see: 6-14...
  • Page 285: Engine Oil

    A. Windshield Washer Fluid Reservoir. See “Adding Washer Fluid” under Windshield Washer Fluid on page 6-33. B. Battery. See Battery on page 6-38. C. Underhood Fuse Block. See Underhood Fuse Block on page 6-97. D. Remote Positive (+) Terminal. See Jump Starting on page 6-39.
  • Page 286: When To Add Engine Oil

    When to Add Engine Oil V6 Engine V8 Engine If the oil is below the cross-hatched area at the tip of the dipstick, add at least one quart/liter of the recommended oil. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications on page 6-100.
  • Page 287: Cold Temperature Operation

    What Kind of Engine Oil to Use Look for three things: • GM6094M Use only an oil that meets GM Standard GM6094M. • SAE 5W-30 SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50.
  • Page 288: Engine Oil Life System

    Engine Oil Additives / Engine Oil Flushes Do not add anything to the oil. The recommended oils with the starburst symbol that meet GM Standard GM6094M are all that is needed for good performance and engine protection. Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty.
  • Page 289: Engine Air Cleaner/Filter

    How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.
  • Page 290: How To Inspect The Engine Air Cleaner/Filter

    When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 50,000 mile (80 000 km) interval. See Scheduled Maintenance on page 7-3 for more information. If you are driving in dusty/dirty conditions, inspect the filter at each engine oil change.
  • Page 291 2. Push the filter cover housing toward the engine. 3. Pull out the filter. 4. Inspect or replace the engine air cleaner/filter. 5. To reinstall the cover, position the tabs through the hinges on the housing. 6. Push the cover tabs on top of the housing to lock the cover in place.
  • Page 292: Automatic Transmission Fluid

    Automatic Transmission Fluid When to Check and Change Automatic Transmission Fluid A good time to check your automatic transmission fluid level is when the engine oil is changed. Change the fluid and filter at the intervals listed in Scheduled Maintenance on page 7-3, and be sure to use the transmission fluid listed in Recommended Fluids and Lubricants on page 7-10.
  • Page 293: Checking The Fluid Level

    Checking the Fluid Level Prepare your vehicle as follows: 1. Park your vehicle on a level place. Keep the engine running. 2. With the parking brake applied, place the shift lever in P (Park). 3. With your foot on the brake pedal, move the shift lever through each gear range, pausing for about three seconds in each range.
  • Page 294: Cooling System

    How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. See Recommended Fluids and Lubricants on page 7-10. If the fluid level is low, add only enough of the proper fluid to bring the level into the cross-hatched area on the dipstick.
  • Page 295: Engine Coolant

    WARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. WARNING: Heater and radiator hoses, and other engine parts, can be very hot.
  • Page 296: What To Use

    What to Use WARNING: Adding only plain water to the cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. The vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, the engine could get too hot but you would not get the overheat warning.
  • Page 297: Checking Coolant

    Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant recovery tank. If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at or above the COLD FILL line, add a 50/50 mixture of clean, ®...
  • Page 298: How To Add Coolant To The Radiator

    How to Add Coolant to the Radiator WARNING: An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury. Keep hands, clothing, and tools away from any underhood electric fan. WARNING: Steam and scalding liquids from a hot cooling system can blow out and burn you badly.
  • Page 299: Engine Overheating

    4. Then fill the coolant recovery tank to the COLD FILL line. 5. Install the coolant recovery tank cap and the pressure cap. After a day or two of driving, when the engine is cold, check the coolant level in the recovery tank.
  • Page 300: If Steam Is Coming From The Engine Compartment

    In addition, you will find an ENGINE OVERHEATED IDLE ENGINE and an ENGINE OVERHEATED STOP ENGINE message displayed on the vehicle’s Driver Information Center (DIC). See DIC Warnings and Messages on page 4-44 DIC Warnings and Messages for more information. You may decide not to lift the hood when this warning appears, but instead get service help right away.
  • Page 301: If No Steam Is Coming From The Engine Compartment

    If No Steam Is Coming From The Engine Compartment If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: •...
  • Page 302: Overheated Engine Protection Operating Mode

    Overheated Engine Protection Operating Mode This emergency operating mode allows your vehicle to be driven to a safe place in an emergency situation. If an overheated engine condition exists, an overheat protection mode which alternates firing groups of cylinders helps prevent engine damage. In this mode, you will notice a significant loss in power and engine performance.
  • Page 303: Windshield Washer Fluid

    How to Check Power Steering Fluid To check the power steering fluid, do the following: 1. Turn the key off and let the engine compartment cool down. 2. Wipe the cap and the top of the reservoir clean. 3. Unscrew the cap and wipe the dipstick with a clean rag.
  • Page 304: Adding Washer Fluid

    Adding Washer Fluid A WASHER FLUID LOW ADD FLUID message will be displayed on the Driver Information Center (DIC) when you need to add windshield washer fluid to your vehicle. See DIC Warnings and Messages on page 4-44 for more information. Open the cap with the washer symbol on it.
  • Page 305: Brakes

    Brakes Brake Fluid The brake master cylinder reservoir is filled with DOT 3 brake fluid. See Engine Compartment Overview on page 6-14 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir might go down: •...
  • Page 306: Brake Wear

    What to Add Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 7-10. Always clean the brake fluid reservoir cap and the area around the cap before removing it. This helps keep dirt from entering the reservoir.
  • Page 307: Brake Adjustment

    WARNING: The brake wear warning sound means that soon the brakes will not work well. That could lead to an accident. When the brake wear warning sound is heard, have the vehicle serviced. Notice: Continuing to drive with worn-out brake pads could result in costly brake repair.
  • Page 308: Battery

    Battery Refer to the replacement number on the original battery label when a new battery is needed. See Engine Compartment Overview on page 6-14 for battery location. DANGER: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm.
  • Page 309: Jump Starting

    Jump Starting If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. WARNING: Batteries can hurt you. They can be dangerous because: •...
  • Page 310 Notice: If you leave the radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by the warranty. Always turn off the radio and other accessories when jump starting the vehicle. 3.
  • Page 311 WARNING: Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle.
  • Page 312 6. Connect the red positive (+) cable to the positive (+) terminal location of the vehicle with the dead battery. Use a remote positive (+) terminal if the vehicle has one. 7. Do not let the other end touch metal. Connect it to the positive (+) terminal location of the vehicle with the good battery.
  • Page 313: Headlamp Aiming

    To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative (−) cable from the vehicle that had the dead battery. 2. Disconnect the black negative (−) cable from the vehicle with the good battery. 3.
  • Page 314: Headlamps, Front Turn Signal, Sidemarker, And Parking Lamps

    Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps A. Sidemarker C. High-Beam B. Low-Beam Headlamp Headlamp D. Parking/Turn Signal Lamp 6-44 To replace one of these bulbs: 1. Open the hood. See Hood Release on page 6-13. 2. Remove the screw from the headlamp assembly.
  • Page 315 3. Pull up on the plastic headlamp retainer and remove it. 4. Pull the headlamp assembly away from the vehicle and remove the electrical connector. 5. Remove the round dust caps to gain access to the bulbs. 6. Turn the old bulb counterclockwise and remove it from the retaining ring by pulling it away from the headlamp.
  • Page 316 12. Push down on the plastic headlamp retainer to 13. Reinstall the screw from the headlamp assembly. reinstall it. 6-46...
  • Page 317: Taillamps, Turn Signal, Sidemarker, Stoplamps And Back-Up Lamps

    Taillamps, Turn Signal, Sidemarker, Stoplamps and Back-up Lamps A. Rear Sidemarker Lamp B. Back-up Lamp C. Stoplamp/Taillamp/Turn Signal To replace one of these bulbs: 1. Open the trunk. See Trunk on page 3-12. 2. Remove the convenience net. Unhook the net from the upper wing nut.
  • Page 318 5. Turn the two hex nuts counterclockwise to remove them. 6. Pull out the taillamp assembly and disconnect the wiring harness. 7. Turn the bulb socket counterclockwise to remove it. 8. Pull the old bulb straight out to remove it. 9.
  • Page 319: License Plate Lamp

    License Plate Lamp To replace one of these bulbs: 1. Turn the lamp assembly counterclockwise and pull the lamp assembly out of the connector. 2. Pull the old bulb from the lamp assembly, keeping the bulb straight as you pull it out. 3.
  • Page 320 To remove and replace the wiper blade element do the following: 4. The wiper blade element has two notches at one end which are engaged by the bottom claw set of the wiper blade. At the notched end of the wiper blade, pull the wiper blade element from the wiper blade assembly.
  • Page 321: Tires

    Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer. WARNING: Poorly maintained and improperly used tires are dangerous.
  • Page 322: Tire Sidewall Labeling

    Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P-Metric) Tire Example 6-52 (A) Tire Size The tire size is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type, and service description.
  • Page 323 (E) Tire Ply Material The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG) Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction, and temperature resistance. For more information see Uniform Tire Quality Grading on page 6-70.
  • Page 324 (B) Tire Ply Material The type of cord and number of plies in the sidewall and under the tread. (C) Tire Identification Number (TIN) and numbers following the DOT (Department of Transportation) code is the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured.
  • Page 325 Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S.
  • Page 326: Tire Terminology And Definitions

    Tire Terminology and Definitions Air Pressure The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight This means the combined weight of optional accessories.
  • Page 327 GAWR RR Gross Axle Weight Rating for the rear axle. See Loading the Vehicle on page 5-20. Intended Outboard Sidewall an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa) The metric unit for air pressure. Light Truck (LT-Metric) Tire light duty trucks and some multipurpose passenger vehicles.
  • Page 328 Radial Ply Tire A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. A metal support for a tire and upon which the tire beads are seated. Sidewall The portion of a tire between the tread and the bead.
  • Page 329: Inflation - Tire Pressure

    Inflation - Tire Pressure Tires need the correct amount of air pressure to operate effectively. Notice: Do not let anyone tell you that under-inflation or over-inflation is all right. It is not. If your tires do not have enough air (under-inflation), you can get the following: •...
  • Page 330: How To Check

    How to Check Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they are under-inflated. Check the tire’s inflation pressure when the tires are cold.
  • Page 331 Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.
  • Page 332: Tire Pressure Monitor Operation

    Tire Pressure Monitor Operation This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designed to warn the driver when a low tire pressure condition exists. TPMS sensors are mounted onto each tire and wheel assembly, excluding the spare tire and wheel assembly.
  • Page 333: Tpms Malfunction Light And Message

    TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle.
  • Page 334: Tpms Sensor Matching Process

    TPMS Sensor Matching Process Each TPMS sensor has a unique identification code. Any time you rotate your vehicle’s tires or replace one or more of the TPMS sensors, the identification codes will need to be matched to the new tire/wheel position. The sensors are matched to the tire/wheel positions in the following order: driver side front tire, passenger side front tire, passenger side rear tire, and driver...
  • Page 335: Tire Inspection And Rotation

    8. Proceed to the driver side rear tire, and repeat the procedure in Step 5. The horn sounds two times to indicate the sensor identification code has been matched to the driver side rear tire, and the TPMS sensor matching process is no longer active. The TIRE LEARNING ACTIVE message on the DIC display screen goes off.
  • Page 336 When rotating the vehicle’s tires, always use the correct rotation pattern shown here. Do not include the compact spare tire in the tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire and Loading Information label.
  • Page 337: When It Is Time For New Tires

    When It Is Time for New Tires Various factors, such as maintenance, temperatures, driving speeds, vehicle loading, and road conditions influence when you need new tires. One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch...
  • Page 338: Buying New Tires

    Buying New Tires GM has developed and matched specific tires for your vehicle. The original equipment tires installed on your vehicle, when it was new, were designed to meet General Motors Tire Performance Criteria Specification (TPC Spec) system rating. If you need replacement tires, GM strongly recommends that you get tires with the same TPC Spec rating.
  • Page 339: Different Size Tires And Wheels

    WARNING: If you use bias-ply tires on the vehicle, the wheel rim flanges could develop cracks after many miles of driving. A tire and/or wheel could fail suddenly, causing a crash. Use only radial-ply tires with the wheels on the vehicle. If you must replace your vehicle’s tires with those that do not have a TPC Spec number, make sure they are the same size, load range, speed...
  • Page 340: Uniform Tire Quality Grading

    Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance.
  • Page 341: Wheel Alignment And Tire Balance

    Temperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
  • Page 342: Used Replacement Wheels

    If you need to replace any of your wheels, wheel bolts, wheel nuts, or Tire Pressure Monitor System (TPMS) sensors, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts, wheel nuts, and TPMS sensors for your vehicle.
  • Page 343: Tire Chains

    Tire Chains WARNING: If your vehicle has P225/55R17 or P235/50R18 size tires, do not use tire chains, there is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others may be injured in a crash.
  • Page 344: If A Tire Goes Flat

    If a Tire Goes Flat It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is much more likely to leak out slowly.
  • Page 345: Changing A Flat Tire

    Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 4-3. WARNING: Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people.
  • Page 346: Removing The Spare Tire And Tools

    Removing the Spare Tire and Tools The equipment you will need is located in the trunk. 1. Open the trunk. See Trunk on page 3-12. 2. Remove the convenience net if the vehicle has one. 3. Remove the spare tire cover. 4.
  • Page 347: Removing The Flat Tire And Installing The Spare Tire

    The tools you will need to change a tire include the jack (A), extension and protection guide (B), and wheel wrench (C). Removing the Flat Tire and Installing the Spare Tire This vehicle may have aluminum wheels with exposed wheel nuts. Use the wheel wrench to loosen all the wheel nuts.
  • Page 348 If needed, use the flat end of the wheel wrench and pry along the edge of the cover until it comes off. The edge of the wheel cover could be sharp, so do not try to remove it with your bare hands. Do not drop the cover or lay it face down, as it could become scratched or damaged.
  • Page 349 3. For all wheel types, find the jacking location using the diagram above and the corresponding jacking notches located on the bottom side of the plastic molding. The notches in the plastic molding are marked with a triangle shape to help you find them. The front location is about 7.0 inches (17.7 cm) from the rear edge of the front wheel well.
  • Page 350 WARNING: Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack.
  • Page 351 WARNING: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
  • Page 352 10. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely. WARNING: Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque WARNING: (Continued) 6-82 WARNING: (Continued)
  • Page 353: Storing A Flat Or Spare Tire And Tools

    Notice: Wheel covers will not fit on your vehicle’s compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged. Storing a Flat or Spare Tire and Tools WARNING: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury.
  • Page 354 A. Cover B. Retainer C. Compact Spare Tire D. Wing Nut E. Jack F. Wheel Wrench G. Extension Protector H. Foam Holder I. Bolt Screw Compact Spare Tire 6-84...
  • Page 355 A. Retainer B. Full-Size Flat Tire C. Protective Guide D. Extension Bolt Screw E. Wing Nut F. Jack G. Wheel Wrench H. Foam Holder I. Bolt Screw Full-Size Flat Tire 6-85...
  • Page 356: Compact Spare Tire

    Compact Spare Tire WARNING: Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a crash and you or others could be injured. Use only one compact spare tire at a time.
  • Page 357: Appearance Care

    Appearance Care Interior Cleaning The vehicle’s interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on the upholstery. Dirt can damage carpet, fabric, leather, and plastic surfaces. Regular vacuuming is recommended to remove particles from the upholstery.
  • Page 358: Fabric/Carpet

    Products that remove odors from the vehicle’s upholstery and clean the vehicle’s glass can be obtained from your dealer/retailer. Do not clean the vehicle using: • A knife or any other sharp object to remove a soil from any interior surface. •...
  • Page 359: Leather

    To clean: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Wring the cloth to remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center. Continue cleaning, using a clean area of the cloth each time it becomes soiled.
  • Page 360: Instrument Panel, Vinyl, And Other Plastic Surfaces

    Instrument Panel, Vinyl, and Other Plastic Surfaces A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove dust and dirt. Never use spot lifters or removers on plastic surfaces.
  • Page 361: Washing Your Vehicle

    Washing Your Vehicle The best way to preserve the vehicle’s finish is to keep it clean by washing it often. Notice: Certain cleaners contain chemicals that can damage the emblems or nameplates on the vehicle. Check the cleaning product label. If it states that it should not be used on plastic parts, do not use it on the vehicle or damage may occur and it would not be covered by the warranty.
  • Page 362: Finish Care

    Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer/retailer. If the vehicle has a basecoat/clearcoat paint finish, the clearcoat gives more depth and gloss to the colored basecoat.
  • Page 363: Aluminum Wheels

    Aluminum Wheels Notice: Using strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels, could damage the surface of the wheel(s). The repairs would not be covered by the vehicle warranty. Use only approved cleaners on aluminum or chrome-plated wheels.
  • Page 364: Sheet Metal Damage

    Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
  • Page 365: Vehicle Identification

    Vehicle Identification Vehicle Identification Number (VIN) This legal identifier is in the front corner of the instrument panel, on the driver side. It can be seen through the windshield from outside. The VIN also appears on the Vehicle Certification and Service Parts labels and certificates of title and registration.
  • Page 366: Headlamp Wiring

    Headlamp Wiring The headlamp wiring is protected by fuses in the fuse block. An electrical overload will cause the lamps to turn off. If this happens, have the headlamp wiring checked right away. Windshield Wiper Fuses The windshield wiper motor is protected by a fuse. If the motor overheats due to heavy snow, etc., the wiper will stop until the motor cools.
  • Page 367: Underhood Fuse Block

    Fuses Usage AIRBAG Airbags Amplifier Auxiliary Outlets CNSTR Canister DR/LCK Door Locks HTD/SEAT Heated Seats Fuses PWR/MIR Power Mirrors PWR/SEAT Power Seats PWR/WNDW Power Window Retained Accessory Power S/ROOF Sunroof TRUNK Trunk TRUNK Trunk Relay XM™ Radio Underhood Fuse Block The underhood fuse block is located in the engine compartment.
  • Page 368 6-98 Fuses Usage A/C CMPRSR Air Conditioning Compressor Antilock Brake System (ABS) ABS MTR 1 Motor 1 ABS MTR 2 ABS Motor 2 AIR PUMP Air Pump AIR SOL Air Injection Reactor Solenoid AIRBAG/ Airbag, Display DISPLAY AUX PWR Auxiliary Power BATT 1 Battery 1 BATT 2...
  • Page 369 Fuses Usage ETC/ECM Electronic Throttle Control, ECM FAN 1 Cooling Fan 1 FAN 2 Cooling Fan 2 FOG LAMPS Fog Lamps (If Equipped) FUEL/PUMP Fuel Pump HDLP MDL Headlamp Module HORN Horn HTD MIR Heated Mirror INJ 1 Injector 1 INJ 2 Injector 2 INT LIGHTS...
  • Page 370: Capacities And Specifications

    Capacities and Specifications The following approximate capacities are given in Metric and English conversions. See Recommended Fluids and Lubricants on page 7-10 for more information. Application Air Conditioning Refrigerant R134a Automatic Transmission (Bottom Pan Removal) Cooling System Including Reservoir 3.5L V6, 3.5L and 3.9L V6 Flexible Fuel Engines Engine Oil with Filter 3.5L V6, 3.5L and 3.9L V6 Flexible Fuel Engines Fuel Tank...
  • Page 371 Engine 3.5L V6 3.5L Flexible Fuel V6 3.9L Flexible Fuel V6 Engine Specifications VIN Code Transmission Automatic Automatic Automatic Spark Plug Gap 1.01 mm (0.040 in) 1.01 mm (0.040 in ) 1.01 mm (0.040 in ) 6-101...
  • Page 372 ✍ NOTES 6-102...
  • Page 373 Section 7 Maintenance Schedule ...7-2 Introduction ...7-2 Scheduled Maintenance ...7-3 Owner Checks and Services ...7-8 Maintenance Schedule Recommended Fluids and Lubricants ...7-10 Maintenance Replacement Parts ...7-11 Engine Drive Belt Routing ...7-12 Maintenance Record ...7-13...
  • Page 374: Maintenance Schedule

    Maintenance Schedule Introduction Notice: Maintenance intervals, checks, inspections, recommended fluids, and lubricants are necessary to keep this vehicle in good working condition. Damage caused by failure to follow scheduled maintenance might not be covered by the vehicle warranty. Proper vehicle maintenance helps to keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions for better air quality.
  • Page 375: Scheduled Maintenance

    Rotation of New Tires To maintain ride, handling, and performance of the vehicle, it is important that the first rotation service for new tires be performed when they have 8 000 to 13 000 km (5,000 to 8,000 miles). See Tire Inspection and Rotation on page 6-65.
  • Page 376 Maintenance I • Change engine oil and filter. See Engine Oil on page 6-15. An Emission Control Service. • Engine coolant level check. See Engine Coolant on page 6-25. • Windshield washer fluid level check. See Windshield Washer Fluid on page 6-33. •...
  • Page 377: Additional Required Services

    • Automatic transmission fluid level check and adding fluid, if needed. See Automatic Transmission Fluid on page 6-22. • Engine air cleaner filter inspection. See Engine Air Cleaner/Filter on page 6-19. • Passenger compartment air filter replacement (or every 12 months, whichever occurs first). More frequent replacement may be required if vehicle is driven regularly under dusty conditions.
  • Page 378 First Engine Oil Change After Every 40 000 km/25,000 Miles • Fuel system inspection for damage or leaks. First Engine Oil Change After Every 80 000 km/50,000 Miles • Engine air cleaner filter replacement. See Engine Air Cleaner/Filter on page 6-19. •...
  • Page 379 Change engine oil and filter. Reset oil life system. Engine coolant level check. Windshield washer fluid level check. Tire inflation pressures check. Tire wear inspection. Rotate tires. Fluids visual leak check. Engine air cleaner filter inspection (vehicles driven in dusty conditions only). Brake system inspection.
  • Page 380: Owner Checks And Services

    Owner Checks and Services Starter Switch Check WARNING: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle. 2.
  • Page 381: Ignition Transmission Lock Check

    Ignition Transmission Lock Check While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. • The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). •...
  • Page 382: Recommended Fluids And Lubricants

    Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number, or specification can be obtained from your dealer/retailer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Engine Oil Certified for Gasoline Engines starburst symbol.
  • Page 383: Maintenance Replacement Parts

    Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your dealer/retailer. Part Engine Air Cleaner/Filter Engine Oil Filter 3.5L V6, 3.5L and 3.9L V6 Flexible Fuel Engines Passenger Compartment Air Filter Spark Plugs 3.5L V6, 3.5L and 3.9L V6 Flexible Fuel Engines Wiper Blades Driver - 21.7 in (55.0 cm)
  • Page 384: Engine Drive Belt Routing

    Engine Drive Belt Routing 3.5L V6 and 3.9 V6 Engines 7-12...
  • Page 385: Maintenance Record

    Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. Retain all maintenance receipts. Maintenance Record Odometer Date Serviced By Services Performed Reading 7-13...
  • Page 386 Maintenance Record (cont’d) Odometer Date Serviced By Services Performed Reading 7-14...
  • Page 387 Maintenance Record (cont’d) Odometer Date Serviced By Services Performed Reading 7-15...
  • Page 388 Maintenance Record (cont’d) Odometer Date Serviced By Services Performed Reading 7-16...
  • Page 389: Customer Assistance Information

    Section 8 Customer Assistance and Information ...8-2 Customer Satisfaction Procedure ...8-2 Online Owner Center ...8-5 Customer Assistance for Text Telephone (TTY) Users ...8-6 Customer Assistance Offices ...8-6 GM Mobility Reimbursement Program ...8-7 Roadside Assistance Program ...8-7 Scheduling Service Appointments ...8-11 Courtesy Transportation Program ...8-11 Collision Damage Repair ...8-13 Customer Assistance Information...
  • Page 390: Customer Assistance And Information

    Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Chevrolet. Normally, any concerns with the sales transaction or the operation of the vehicle will be resolved by the dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
  • Page 391 STEP THREE — U.S. Owners: Both General Motors and your dealer are committed to making sure you are completely satisfied with your new vehicle. However, if you continue to remain unsatisfied after following the procedure outlined in Steps One and Two, you can file with the Better Business Bureau (BBB) Auto Line Program to enforce your rights.
  • Page 392 STEP THREE — Canadian Owners: In the event that you do not feel your concerns have been addressed after following the procedure outlined in Steps 1 and 2, General Motors of Canada Limited wants you to be aware of its participation in a no-charge Mediation/ Arbitration Program.
  • Page 393: Online Owner Center

    — all in one convenient place. • Digital owner manual, warranty information, and more • Online service and maintenance records • Find Chevrolet dealers for service nationwide • Exclusive privileges and offers • Recall notices for your specific vehicle • ®...
  • Page 394: Customer Assistance For Text Telephone (Tty) Users

    (2438). (TTY users in Canada can dial 1-800-263-3830.) Customer Assistance Offices Chevrolet encourages customers to call the toll-free number for assistance. However, if a customer wishes to write or e-mail Chevrolet, the letter should be addressed to: United States — Customer Assistance Chevrolet Motor Division Chevrolet Customer Assistance Center P.O.
  • Page 395: Gm Mobility Reimbursement Program

    Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 Col. Lomas de Bezares C.P. 11910, Mexico, D.F. 01-800-508-0000 Long Distance: 011-52-53 29 0 800 GM Mobility Reimbursement...
  • Page 396: Calling For Assistance

    Roadside Assistance is not a part of the New Vehicle Limited Warranty. Chevrolet and General Motors of Canada Limited reserve the right to make any changes or discontinue the Roadside Assistance program at any time without notification.
  • Page 397: Services Provided

    • Emergency Tow From a Public Road or Highway: Tow to the nearest Chevrolet dealer for warranty service, or if the vehicle was in a crash and cannot be driven. Assistance is also given when the vehicle is stuck in the sand, mud, or snow.
  • Page 398 Services Specific to Canadian Purchased Vehicles • Fuel delivery: Reimbursement is approximately $5 Canadian. Diesel fuel delivery may be restricted. Propane and other fuels are not provided through this service. • Lock-Out Service: Vehicle registration is required. • Trip Routing Service: Detailed maps of North America are provided when requested either with the most direct route or the most scenic route.
  • Page 399: Scheduling Service Appointments

    Scheduling Service Appointments When your vehicle requires warranty service, contact your dealer/retailer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer/retailer can help minimize your inconvenience. If your vehicle cannot be scheduled into the service department immediately, keep driving it until it can be scheduled for service, unless, of course, the problem is safety-related.
  • Page 400: Transportation Options

    Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait, GM helps to minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Shuttle Service Shuttle service is the preferred means of offering Courtesy Transportation.
  • Page 401: Collision Damage Repair

    Collision Damage Repair If your vehicle is involved in a collision and it is damaged, have the damage repaired by a qualified technician using the proper equipment and quality replacement parts. Poorly performed collision repairs diminish your vehicle’s resale value, and safety performance can be compromised in subsequent collisions.
  • Page 402: Insuring Your Vehicle

    Insuring Your Vehicle Protect your investment in your GM vehicle with comprehensive and collision insurance coverage. There are significant differences in the quality of coverage afforded by various insurance policy terms. Many insurance policies provide reduced protection to your GM vehicle by limiting compensation for damage repairs by using aftermarket collision parts.
  • Page 403 • Gather the important information you will need from the other driver. Things like name, address, phone number, driver’s license number, vehicle license plate, vehicle make, model and model year, Vehicle Identification Number (VIN), insurance company and policy number, and a general description of the damage to the other vehicle.
  • Page 404: Reporting Safety Defects

    In addition to notifying NHTSA (or Transport Canada) in a situation like this, please notify General Motors. Call 1-800-222-1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P.O. Box 33170 Detroit, MI 48232-5170 In Canada, call 1-800-263-3777 (English) or...
  • Page 405: Owner Information

    Service Publications Ordering Information Service Manuals Service Manuals have the diagnosis and repair information on engines, transmission, axle suspension, brakes, electrical, steering, body, etc. Service Bulletins Service Bulletins give additional technical service information needed to knowledgeably service General Motors cars and trucks. Each bulletin contains instructions to assist in the diagnosis and service of your vehicle.
  • Page 406: Vehicle Data Recording And Privacy

    ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Eastern Time For Credit Card Orders Only (VISA-MasterCard-Discover), visit Helm, Inc. on the World Wide Web at: helminc.com Or you can write to: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 Prices are subject to change without notice and without incurring obligation.
  • Page 407: Event Data Recorders

    Event Data Recorders This vehicle has an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
  • Page 408: Navigation System

    Navigation System If your vehicle has a navigation system, use of the system may result in the storage of destinations, addresses, telephone numbers, and other trip information. Refer to the navigation system operating manual for information on stored data and for deletion instructions.
  • Page 409 Accessories and Modifications ... 6-3 Accessory Power ... 3-21 Accessory Power Outlets ... 4-15 Additives, Fuel ... 6-7 Add-On Electrical Equipment ... 6-95 Air Cleaner/Filter, Engine ... 6-19 Air Conditioning ... 4-16 Air Filter, Passenger Compartment ... 4-20 Airbag Adding Equipment to Your Airbag-Equipped Vehicle ...
  • Page 410 Automatic Door Lock ... 3-10 Automatic Transmission Fluid ... 6-22 Operation ... 3-24 Backglass Antenna ... 4-86 Battery ... 6-38 Electric Power Management ... 4-13 Run-Down Protection ... 4-14 Belt Routing, Engine ... 7-12 ® Bluetooth ... 4-74 Brake Emergencies ... 5-6 Brakes ...
  • Page 411 Charging System Light ... 4-26 Check Engine Lamp ... 4-31 Checking Things Under the Hood ... 6-12 Chemical Paint Spotting ... 6-94 Child Restraints Infants and Young Children ... 2-35 Lower Anchors and Tethers for Children ... 2-43 Older Children ... 2-32 Securing a Child Restraint in a Rear Seat Position ...
  • Page 412 Customer Assistance ... 8-6 Offices ... 8-6 Text Telephone (TTY) Users ... 8-6 Customer Information Service Publications Ordering Information ... 8-17 Customer Satisfaction Procedure ... 8-2 Damage Repair, Collision ... 8-13 Data Recorders, Event ... 8-19 Daytime Running Lamps/Automatic Headlamp System ... 4-10 Defensive Driving ...
  • Page 413 Electrical System (cont.) Power Windows and Other Power Options ... 6-96 Underhood Fuse Block ... 6-97 Windshield Wiper Fuses ... 6-96 Electronic Immobilizer ® PASS-Key III+ ... 3-18 Electronic Immobilizer Operation ® PASS-Key III+ ... 3-18 Electronic Stability Control ... 5-6 Engine Air Cleaner/Filter ...
  • Page 414 Fuel (cont.) Filling a Portable Fuel Container ... 6-12 Filling the Tank ... 6-10 Fuels in Foreign Countries ... 6-9 Gage ... 4-36 Gasoline Octane ... 6-6 Gasoline Specifications ... 6-6 Fuel Economy Driving for Better ... 1-21 Fuses Fuses and Circuit Breakers ... 6-96 Instrument Panel Fuse Block ...
  • Page 415 Ignition Positions ... 3-20 Infants and Young Children, Restraints ... 2-35 Inflation - Tire Pressure ... 6-59 Instrument Panel Brightness ... 4-11 Cluster ... 4-22 Introduction ... 7-2 Jump Starting ... 6-39 Keyless Entry Remote (RKE) System ... 3-4 Keyless Entry System ... 3-4 Keys ...
  • Page 416 Lights (cont.) Security ... 4-35 Tire Pressure ... 4-31 Traction Control System (TCS) Warning ... 4-28 Loading Your Vehicle ... 5-20 Locks Automatic Door Lock ... 3-10 Delayed Locking ... 3-10 Door ... 3-9 Lockout Protection ... 3-12 Power Door ... 3-10 Programmable Automatic Door Unlock ...
  • Page 417 Older Children, Restraints ... 2-32 Online Owner Center ... 8-5 Operation, Universal Home Remote System ... 3-35 Outlet Adjustment ... 4-20 Outlets Accessory Power ... 4-15 Outside Convex Mirror ... 3-34 Heated Mirrors ... 3-34 Power Mirrors ... 3-34 Overheated Engine Protection Operating Mode ... 6-32 Owner Checks and Services ...
  • Page 418 Radio Frequency Identification (RFID) ... 8-20 Statement ... 8-20 Radio(s) ... 4-59 Radios Reception ... 4-85 Setting the Clock ... 4-58 Theft-Deterrent ... 4-84 Reading Lamps ... 4-13 Rear Door Security Locks ... 3-11 Rear Seat Armrest ... 3-42 Rear Storage ... 3-42 Rearview Mirrors ...
  • Page 419 Safety Belts (cont.) Lap Belt ... 2-30 Lap-Shoulder Belt ... 2-25 Reminders ... 4-23 Safety Belts Are for Everyone ... 2-12 Use During Pregnancy ... 2-30 Safety Defects Reporting Canadian Government ... 8-16 General Motors ... 8-16 U.S. Government ... 8-16 Safety Warnings and Symbols ...
  • Page 420 Split Folding Rear Seat ... 2-10 StabiliTrak Control Indicator Light, Electronic ... 4-29 Start Vehicle, Remote ... 3-7 Starting the Engine ... 3-21 Steering ... 5-9 Steering Wheel Controls, Audio ... 4-84 Steering Wheel, Tilt Wheel ... 4-3 Storage Areas Center Console ...
  • Page 421 Tires (cont.) Storing a Flat or Spare Tire and Tools ... 6-83 Terminology and Definitions ... 6-56 Uniform Tire Quality Grading ... 6-70 Wheel Alignment and Tire Balance ... 6-71 Wheel Replacement ... 6-71 When It Is Time for New Tires ... 6-67 Towing Recreational Vehicle ...
  • Page 422 When It Is Time for New Tires ... 6-67 Where to Put the Child Restraint ... 2-42 Windows ... 3-14 Power ... 3-15 Windshield Washer ... 4-6 Washer Fluid ... 6-33 Wiper Blade Replacement ... 6-49 Wiper Blades, Cleaning ... 6-92 Wiper Fuses ...

Table of Contents