Turn Signal/Multifunction Lever; Turn And Lane-Change Signals - Chevrolet 2010 Impala Owner's Manual

Hide thumbs Also See for 2010 Impala:
Table of Contents

Advertisement

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
G
: Turn and Lane Change Signals
2
: Headlamp High/Low-Beam Changer
N
: Windshield Wipers
L Q
: Windshield Washer
Flash-to-Pass.
For information on the headlamps, see Exterior Lamps
on page 4-9.
Information for these features is on the pages following.
4-4

Turn and Lane-Change Signals

Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow starts to flash
to signal a lane change. Hold it there until the lane
change is completed. If the lever is briefly pressed
and released, the turn signal flashes three times.
The lever returns to its starting position whenever it is
released.
If after signaling a turn or lane change the arrow flashes
rapidly or does not come on, a signal bulb might be
burned out.
Have the bulbs replaced. If the bulb is not burned out,
check the fuse. See Fuses and Circuit Breakers on
page 6-96
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents