Bypass Tray - Ricoh M040 Service Training

MD-P1b / M040 / C311N
MD-P1c / M041 / C312DN
By-pass Tray - 1/3
Idle Gear (at tray-1)
By-pass
Bottom
Spring
Plate Gear
By-pass Solenoid Lever
Cam
When not feeding paper from the by-pass tray, the By-pass Solenoid Lever holds the By-pass
Bottom Plate Gear inactive, with the toothless flat section of the By-pass Bottom Plate Gear
next to the (continually rotating) Idle Gear. When the By-pass Solenoid pulls the By-pass
Solenoid Lever away from the By-pass Bottom Plate Gear, the By-pass Bottom Plate Gear
Spring pulls the By-pass Bottom Plate Gear around to where the By-pass Bottom Plate Gear
teeth mesh with the Idle Gear teeth.
Slide 102
.
102