Table of Contents
Advertisement
Paper End
Sensor
This machine uses a friction pad and feed roller system.
The tray can hold 500 sheets.
The bypass can hold 100 sheets.
When the tray is not pushed in fully, the by-pass tray cannot feed. For
this reason, the tray set sensor is used for the tray setting.
Slide 97
The paper end sensor detects whether paper is installed in the tray and
whether the tray is set in the machine.
This machine also does not have automatic paper size detection.
The machine determines the paper size from the on-off timing of the
registration sensor.
If the paper type which is selected at the PC does not match the paper
size measured by the registration sensor, the machine issues a paper
jam alert and stops the motors.
Overview
Registration
Rollers
Paper Feed
Roller
Friction Pad
97
MD-P1b / M040 / C311N
MD-P1c / M041 / C312DN
Pick-up
Roller
Advertisement
Table of Contents
