Ricoh M040 Service Training page 26

Service Program with Operation Panel
Some service programs can be accessed via the LCD-
equipped operation panel of this machine, in addition
to the SOM.
Start Service Program (via Operation Panel):
Press both the Start/Stop key and Escape key together.
(While holding down these two keys), turn on the
printer.
Continue holding keys down for about ten seconds
During the ten seconds, the LED and LCD will indicate
printer status
The machine will indicate that user input has been
accepted with the 'Ready' LED steadily on, and the
'Alert' LED blinking.
» For more details, see the FSM
Slide 26
.
26
MD-P1b / M040 / C311N
MD-P1c / M041 / C312DN