Life Fitness Integrity SL Service Manual page 43

Install LCD Board
1. Install eight screws securing LCD board to front cover using a Phillips screwdriver. If a console has spacers
between the front cover and the Message Center board, reuse the spacers when installing the new Message
Center board.
NOTE: Tighten screws in the following order.
2. Install one ribbon cable by aligning carefully and inserting into Message Center board's flex connector, then press
in on the two tabs to latch ribbon cable into flex connector. Repeat for other connector.
3. Press ground wire onto ground terminal by hand.
Install Rear Cover
1. Install headphone jack cable and USB cable into rear cover.
Non-Treadmill console shown
Item
1
2
3
Item
1
2
3
4
5
Page 41 of 153
Description
Ground terminal
Left ribbon cable
Right ribbon cable
Description
Front cover
Main board
Headphone jack cable
USB connector cable
Rear cover
Qty
1
1
1
Qty
1
1
1
1
1