Error 153
Error Message Displayed to user
E153
Condition
Base data remapped console to reboot soon
Cause
• Integrity C, X or Cybex 50L console. Data stored in the base is being upgraded.
• This is not a fatal error. The process will take between a few seconds and as long as a minute.
Remedy
• Error 153 indicates that an update is taking place to synchronize the persistent data when a software update is
being performed. Allow adequate time for completion of the update and associated reboot.
• If the problem persists try reprogramming the SKU and model number: This can be done on Integrity X console by
using the System Options > Manufacturer Settings.
• On Integrity C and Cybex 50L consoles a USB SKU Programming must occur.
• See Service Bulletin EC180109 and / or Knowledge Base Article 2522.
Page 138 of 153