2. Pry off USB / headphone panel exposing USB connector and headphone jack.
NOTE: USB / headphone panel is held on with Tinnerman clips.
Remove Headphone Jack Connector
1. Remove two screws securing headphone jack connector to rear cover using a Phillips screwdriver.
2. Unplug headphone jack connector from headphone jack.
NOTE: There is enough slack in headphone jack cable to replace headphone jack connector.
Install Headphone Jack Connector
1. Plug headphone jack connector into headphone jack cable.
Item
1
2
3
4
5
Item
1
2
3
Page 31 of 153
Description
Rear cover
Tinnerman clip
USB connector
Headphone jack
USB / headphone panel
Description
Rear cover
Headphone jack connector
Screw
Qty
1
2
1
1
1
Qty
1
1
2