Table of Contents
Advertisement
Emergency towing procedure
Take out the towing eyelet. (P. 619)
1
Remove the eyelet cover using a
2
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the
3
hole and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut
wrench or hard metal bar.
Securely attach cables or chains to the towing eyelet.
5
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
6
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
7
When the shift lever cannot be shifted: P. 267, 275
7-2. Steps to take in an emergency
599
7
Advertisement
Table of Contents
