Lexus LS 460 2017 Manual page 331

Changing the vehicle-to-vehicle distance
Pressing the button changes the
vehicle-to-vehicle distance as fol-
lows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is set
automatically to long mode when the
engine switch is turned to IGNITION
ON mode.
If a vehicle is running ahead of you, the
preceding vehicle mark will also be
displayed.
Vehicle-to-vehicle distance settings
Select a distance from the table below. Note that the distances shown cor-
respond to a vehicle speed of 80 km/h (50 mph). Vehicle-to-vehicle dis-
tance increases/decreases in accordance with vehicle speed. When the
vehicle is stopped by system control, the vehicle-to-vehicle distance will
be about 3 m (10 ft.) to 5 m (16 ft.) regardless of the vehicle-to-vehicle dis-
tance setting.
Distance options
Long
Medium
Short
4-5. Using the driving support systems
Preceding
vehicle mark
Vehicle-to-vehicle distance
Approximately 50 m (160 ft.)
Approximately 40 m (130 ft.)
Approximately 30 m (100 ft.)
331
Type A
Type B
4