Table of Contents
Advertisement
214
3-3. Adjusting the seats
Seat return function linked to the door opening operation
■
Operating conditions
●
The engine switch is in IGNITION ON mode.
Canceling operation partway through
●
During the seat return operation, performing either of the following actions cancels
the operation:
• Pressing the "SET", "M" or "C" button (P. 223)
• Pressing any of the seat adjustment switches
Disabling the seat return function
●
Pressing the "C" button will disable the seat
return function.
The indicator light comes on when the seat
return function is disabled.
Pressing the button again will enable the
seat return function.
Seat return operation after turning the engine switch off
●
The seat will automatically return to the neutral position if the door is opened within
approximately 45 seconds of the engine switch being turned off.
Relaxation mode (relaxation seat)
■
Operating conditions
●
Relaxation mode can be entered when the engine switch is in IGNITION ON
mode. However, in the following situations, relaxation mode cannot be entered
even when the switch is operated:
• The weight of an occupant or heavy object etc. is detected on the front passen-
ger's seat.
• The front passenger's seat belt is fastened.
• The front passenger's door is open. (The front seat will not move forward.)
Operation after turning the engine switch off
●
The rear seat can be returned to the neutral position as long as the relaxation mode
switch is operated within approximately 45 seconds of the engine switch being
turned off.
Advertisement
Table of Contents
