Table of Contents
Advertisement
Turning on the high beam headlights
With the headlights on, push the
1
lever away from you to turn on
the high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and
2
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
Follow me home system (if equipped)
This system allows the headlights, tail, license plate and front position
lights to be turned on for 30 seconds when the engine switch is off.
Pull the lever toward you and
release it with the light switch in
or
after turning the engine
switch off.
The lights are turned off in the following situations.
The engine switch is turned to IGNITION ON mode.
●
The light switch is turned on.
●
The light switch is pulled toward you and then released.
●
4-3. Operating the lights and wipers
,
287
4
Advertisement
Table of Contents
