Table of Contents
Advertisement
Press and hold the vehicle's programmed HomeLink
3
seconds and release it. Repeat this step once again. The garage door
may open.
If the garage door opens, the programming process is complete. If the door
does not open, press and release the button a third time. This third press and
release will complete the programming process by opening the garage door.
The ceiling mounted garage door opener motor should now recognize the
HomeLink
signal and operate the garage door.
Repeat the steps above to program another rolling code system for
4
any of the remaining HomeLink
Programming the HomeLink
Place your transmitter 25 to 75 mm (1 to 3 in.) away from the surface of
1
the HomeLink
.
Keep the HomeLink
Press and hold the selected HomeLink
2
Repeatedly press and release (cycle) the device's remote control but-
3
ton for two seconds each until step 4 is completed.
When the indicator light on the HomeLink
4
starts to flash rapidly, release the buttons.
Test the operation of the HomeLink
5
grammed button. Check to see if the gate/device operates correctly.
Repeat the steps above to program another device for each of the
6
remaining HomeLink
Programming other devices
To program other devices such as home security systems, home door
locks or lighting, contact your Lexus dealer for assistance.
buttons.
®
(garage door type B) or entry gate
indicator light in view while programming.
buttons.
5-6. Other interior features
button.
compatible transceiver
by pressing the newly pro-
501
button for 2
5
Advertisement
Table of Contents
