Checking The Front Brake Linings; Changing The Front Brake Linings - Husqvarna TC 250 2021 Owner's Manual

12 BRAKE SYSTEM
12.6
12.7
80
S03441-10

Checking the front brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
F00062-10

Changing the front brake linings

Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized Husqvarna
Motorcycles workshop will be glad to help.)
Main work
–
Move the brake reservoir mounted on the handlebar to a hori-
zontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
A
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
–
Check the brake linings for minimum thickness
A
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the front brake linings.
3
.
.
5 mm (0.2 in)
p. 127)
A
.
≥ 1 mm (≥ 0.04 in)
( p. 80)
( p. 80)