Husqvarna TC 250 2021 Owner's Manual page 78

11 SERVICE WORK ON THE CHASSIS
76
–
Now press the fluid into the system until it emerges from the
6
hole of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Tighten the bleeder screw.
Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
S03444-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
4 mm (0.16 in)