Husqvarna TC 250 2021 Owner's Manual page 111

–
Remove cap
and spring insert
–
Pull both springs off of the spring insert.
B00056-11
–
Mount the required auxiliary spring (
3
ing spring
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with red marking (54837072000)
The recess in spring insert
lever.
K01308-10
Info
Screw
the engine characteristic.
–
Check the O-ring in the cap.
–
Position the cap.
–
Mount and tighten the screws.
Guideline
Screw, exhaust con-
trol cover
TUNING THE ENGINE 15
2 3
, adjusting spring , auxiliary spring
5
from the clutch cover.
p. 108)
and position them together in the clutch cover.
5
engages in the angle
6
must not be turned as this would worsen
M5 4 Nm (3 lbf ft)
4
,
4
and adjust-
109