Transporting - Husqvarna TC 250 2021 Owner's Manual

8 RIDING INSTRUCTIONS
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
–
Do not park the vehicle near to materials which are highly flammable or explosive.
–
Allow the vehicle to cool down before covering it.
–
Apply the brakes on the motorcycle.
–
Shift the transmission to neutral position.
–
Press and hold the switch-off button
–
Turn the tap handle of the fuel tap to the OFF position.
–
Rest the vehicle on the plug-in stand.
8.7
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
–
Do not park the vehicle near to materials which are highly flammable or explosive.
–
Allow the vehicle to cool down before covering it.
30

Transporting

H02628-01
401475-01
while the engine is idling until the engine stops.
–
Switch off the engine.
–
Mount plug-in stand on the fork legs.
Plug-in stand (79029094000)
Info
The plug-in stand is included.
Make sure the brake line runs in front of the plug-in
stand and does not become wedged.
–
Use tension belts or other suitable devices to secure the
motorcycle against falling over or rolling away.
Info
Only tighten the tension belts to the point that the
plug-in stand is in contact with the fender and tires.
Pay attention to the alignment of the plug-in stand to
the fender.