Husqvarna TC 250 2021 Owner's Manual page 100

14 COOLING SYSTEM
98
–
Pour coolant in up to measurement
fins.
Guideline
10 mm (0.39 in)
Coolant (
400243-10
–
Loosen screw
bubbles.
–
Mount and tighten screw
Guideline
Bleeder screw, cylin-
der head
F01645-10
–
Pour coolant in up to measurement
fins.
Guideline
10 mm (0.39 in)
Coolant (
400243-10
–
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
K01247-10
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
Finishing work
–
Check the coolant level. (
A
above the radiator
p. 127)
2
and wait until coolant escapes without
2
.
M6 10 Nm (7.4 lbf ft)
A
above the radiator
p. 127)
3
.
p. 96)