Recommended Work - Husqvarna TC 250 2021 Owner's Manual

Check that the throttle cables are undamaged, routed without sharp bends, and
set correctly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Service the fork.
Perform the shock absorber service.
Check the tightness of the easily accessible, safety-relevant screws and nuts.
Check the idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Make a service entry in Husqvarna Motorcycles Dealer.net.
○
One-time interval
●
Periodic interval
9.3

Recommended work

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Lubricate the steering head bearing.
Service the fork.
Perform the shock absorber service.
Check/adjust the carburetor components.
Change the needle jet.
Change the coolant. ( p. 99)
Perform minor engine service. (Check the reed valve housing, reed valve, and intake
flange. Check the clutch. Under difficult operating conditions: Change the piston and
check the cylinder and Z dimension.)
Perform the intermediate engine service. (Change the piston and check the cylinder
and Z dimension. Check the exhaust control for functioning and smooth operation.)
Perform major engine service including removing and installing the engine. (Change
the connecting rod, conrod bearing, and crank pin. Check the transmission and shift
mechanism. Change all engine bearings.)
○
One-time interval
●
Periodic interval
After 1 operating hour
( p. 60)
( p. 62)
After 20 operating hours / Every 20 operating hours
After 10 operating hours / Every 10 operating hours
( p. 75)
( p. 53)
SERVICE SCHEDULE 9
after every race
Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
After 5 operating hours
○ ●
●
○ ●
○ ●
○ ○ ●
○ ○ ●
Every 40 operating hours
every 48 months
every 12 months
● ●
● ●
● ●
● ●
● ●
● ●
●
● ● ●
● ● ●
● ●
●
●
● ● ●
● ● ●
● ● ●
● ● ●
○
○
●
●
● ● ●
● ●
●
33