Table of Contents
Advertisement
6.5
REMOVAL/ASSEMBLY OF THE FRAME (SWEET
K AT)
To assemble the frame, proceed as follows:
• Remove the 2 screws at the bottom of the frame (see Fig. 26).
• Push the frame upwards and release the teeth (see Fig. 27).
• Remove the frame (see Fig. 28).
• To assemble the frame, proceed in reverse order.
Fig. 26 - Remove screws
6.6
REMOVAL/ASSEMBLY OF SIDE PANELS (SWEET
K AT)
To disassemble the side panels, proceed as follows:
• Undo the rear screws (see Fig. 29).
• Open the side panel (see Fig. 30) and release the fastening teeth (see Fig. 31).
• To assemble, proceed in reverse order.
Fig. 29 - Remove the screws
6.7
REMOVAL/ASSEMBLY OF SIDE PANELS (CRISTAL
To disassemble the side panels, proceed as follows:
• Undo the front screws (see Fig. 32).
• Open the side panel (see Fig. 33) and release the rear teeth (see Fig. 34).
• To assemble, proceed in reverse order.
18
7.0 - ONE AT - BEAM AT - ACCENT AT - ACCENT
3
Fig. 27 - Release the frame
7.0 - ONE AT - BEAM AT - ACCENT AT - ACCENT
3
Fig. 30 - Release the side panels
7.0 - LORD 7.0)
3
Fig. 28 - Remove the frame
Fig. 31 - Fastening teeth
Stufe a pellet
Advertisement
Table of Contents
