Power Management Setup Option - ECS P6IEMT Manual

Power Management Setup Option

This option lets you control system power management. The
system has various power-saving modes including powering
down the hard disk, turning off the video, suspending to RAM,
and software power down that allows the system to be auto-
matically resumed by certain events.
The power-saving modes can be controlled by timeouts. If the
system is inactive for a time, the timeouts begin counting. If
the inactivity continues so that the timeout period elapses, the
system enters a power-saving mode. If any item in the list of
Reload Global Timer Events is Enabled, then any activity on
that item will reset the timeout counters to zero.
If the system is suspended or has been powered down by
software, it can be resumed by a wake up call that is gener-
ated by incoming traffic to a modem, a LAN card, a PCI card,
or a fixed alarm on the system realtime clock,
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
ACPI function
ACPI Suspend Type
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD PwrDown in Suspend
HDD Power Down
Soft-Off by PWRBTN
Wake-Up by PCI card
Power On by Ring
Wake Up On LAN
USB KB Wake-Up From S3
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
** Reload Global Timer Events **
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
ACPI Function (Enabled)
This mainboard supports ACPI (Advanced Configuration and
Power management Interface). Use this item to enable or dis-
able the ACPI feature.
Power Management Setup
[Enabled ]
[S1(POS)]
[User Define]
[DPMS]
[Yes]
[Stop Grant]
[3]
[Disabled]
[Enabled]
[Disable]
[Instant-Off]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
0
0 0 0
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
50
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults