Power Management Setup Option - ECS L4S5A User Manual

SC Port Address (Disabled)
The smart card reader needs a 16-byte fixed I/O address to access data. You
may need an optional module to be able to use this function. When this item is
set, the following item becomes available:
•
SC Port IRQ: Enables you to set the smart card IRQ.
MS/SD Port Address (Disabled)
The memory stick/secure digital device needs a 16-byte fixed I/O address to
access data. You may need an optional module to use this function. . When
this item is set, the following item b ecomes available:
•
MS/SD Port IRQ: Enables you to set the Memory stick/secure digi-
tal device IRQ.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in one of
the PCI slots or is integrated on the mainboard.
AGP Auto Calibration (Enabled)
This item allows you to enable or disable the AGP buffer strength auto calibra-
tion through the chipset.
IDE ACCESS INTERFACE (Embedded Bus)
This item determines whether the IDE access interface is the PCI bus or the
embedded bus.
USB1 ACCESS INTERFACE (Embedded BUS)
This option determines whether the USB1 access interface is the embedded
bus or the PCI bus.
USB2 ACCESS INTERFACE (Embedded BUS)
This option determines whether the USB0 access interface is the embedded
bus or a PCI bus.
Audio ACCESS INTERFACE (Embedded BUS)
This option determines whether the audio access interface is the embedded
bus or a PCI bus.

Power Management Setup Option

This option lets you control system power management. The system has vari-
ous power-saving modes including powering down the hard disk, turning off
the video, suspending to RAM, and software power down that allows the sys-
tem to be automatically resumed by certain events.
37