ECS P6IEMT Manual page 33

SIR1: Serial infrared port
The mainboard supports a Serial Infrared (SIR) data port. In-
frared ports allow the wireless exchange of information
between your computer and similarly equipped devices.
These devices may include printers, laptops, Personal Digital
Assistants (PDAs), and other computers.
Pin Signal Name
1 Not assigned
3 +5V
5 IRTX
SPEAKER1: Internal speaker
Connect the internal speaker connector to this header.
Pin Signal Name
1 SPKR
2 NC
3 NC
4 +5V
WOL1/WOM: Wake On LAN/Wake On Modem
If you have installed a LAN card, use the cable provided with
the card to plug into the mainboard WOL1 connector. This en-
ables the Wake On LAN (WOL) feature. When your system is
in a power-saving mode, any LAN signal automatically r e-
sumes the system. You must enable this item using the Power
Management page of the Setup Utility.
Pin Signal Name
1 5VSB
2 Ground
3 SENSE
If you have installed a modem, use the cable provided with
the modem to plug into the mainboard WOM1 connector. This
enables the Wake On Modem (WOM) feature. When your sys-
tem is in a power-saving mode, any modem signal
automatically resumes the system. You must enable this item
using the Power Management page of the Setup Utility. See
Chapter 3 for more information.
Pin Signal Name
2 (No Pin)
4 Ground
6 IRRX
27