ECS P6IEMT Manual page 59

Power On by Ring (Disabled)
If this item is enabled, it allows the system to resume from a
software power down or a power-saving mode whenever
there is an incoming call to an installed fax/modem. You have
to connect the fax/modem to a mainboard Wake On Modem
connector for this feature to work.
Wake Up On LAN (Enabled)
When set to Enabled, the system power will be turned on if
the LAN port receives an incoming signal. You have to con-
nect the fax/modem to a mainboard Wake On LAN connector
for this feature to work.
USB KB Wake-Up S3 (Disabled)
If you are using a USB keyboard, and the ACPI suspend type
is set to S3, you can enable this item to allow a keystroke to
wake up the system from power saving mode.
Resume by Alarm (Disabled)
When set to Enabled, additional fields become available and
you can set the date (day of the month), hour, minute and
second to turn on your system. When set to 0 (zero) for the
day of the month, the alarm will power on your system every
day at the specified time.
** Reload Global Timer Events **
Global Timer (power management) events are I/O events
whose occurrence can prevent the system from entering a
power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything that oc-
curs to a device that is configured as Enabled, even when the
system is in a power-down mode.
Primary/Secondary IDE 1/0 (Disabled)
When these items are enabled, the system will restart the
power-saving timeout counters when any activity is detected
on any of the drives or d evices on the primary or secondary
IDE channels.
53