Pnp/Pci Configuration Option - ECS P6IEMT Manual

FDD, COM, LPT Port (Disabled)
When this item is enabled, the system will restart the power-
saving timeout counters when any activity is detected on the
floppy disk drive, serial ports, or the parallel port.
PCI PIRQ[A-D]# (Disabled)
When disabled, any PCI device set as the Master will not
power on the system.

PNP/PCI Configuration Option

This option configures how PnP (Plug and Play) and PCI ex-
pansion cards operate in your system. Both the ISA and PCI
buses on the Mainboard use system IRQs (Interrupt Re-
Quests) and DMAs (Direct Memory Access). You must set up
the IRQ and DMA assignments correctly through the PnP/PCI
Configurations Setup utility for the mainboard to work properly.
Selecting PnP/PCI Configurations on the main program
screen displays this menu:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Reset Configuration Data
Resources Controlled by
x IRQ Resources
PCI/VGA Palette Snoop
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Reset Configuration Data (Disabled)
If you enable this item and restart the system, any Plug and
Play configuration data stored in the BIOS Setup is cleared
from memory.
PnP/PCI Configurations
[Disabled]
[Auto(ESCD)]
[Press Enter]
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults
54
Item Help
Menu Level
Default is Disabled. Select
Enabled to reset Extended
System Configuration
Data (ESCD) when you
exit Setup if you have
installed a new add-on
and the system reconfigu-
ration has caused such a
serious conflict that the
OS cannot boot.
F1:General Help
F7:Optimized Defaults