The disk drive software monitors the internal performance of
the motors, media, heads, and electronics of the drive. The
host software monitors the overall reliability status of the drive.
If a device failure is predicted, the host software, through the
Client WORKS S.M.A.R.T applet, warns the user of the i m -
pending condition and advises appropriate action to protect
the data.
Report No FDD For WIN95 (Yes)
If you are running a system with no floppy drive and using
Windows 95, select Yes for this item to ensure compatibility
with the Windows 95 logo certification. Otherwise, select No.
Advanced Chipset Features Option
These items define critical timing parameters of the main-
board. You should leave the items on this page at their default
values unless you are very familiar with the technical specifi-
cations of your system hardware. If you change the values
incorrectly, you may introduce fatal errors or recurring instabil-
ity into your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
SDRAM CAS Latency Time
SDRAM Cycle Time Tras/TRC
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole At 15M -16M
CPU Latency Timer
Delayed Transaction
AGP Graphics Aperture Size
AGP Device 4X Support
Use VGA BIOS in VBU Block
Display Cache Frequency
System Memory Freq uency
On-Chip Video Window Size
* Onboard Display Cache Setting *
CAS# Latency
Paging Mode Control
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Advanced Chipset Features
[3]
[7/9]
[3]
[3]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[64MB]
[Enabled]
[Enabled]
[100MHz]
[100MHz]
[64MB]
[3]
[Open]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
42
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults