Table of Contents
Advertisement
Installing Memory Modules
For this mainboard, you
must use 168-pin 3.3V
non-buffered Dual In-line
Memory Modules
(DIMMs). The memory
chips are standard
SDRAM (Synchronous
Dynamic Random Ac-
cess Memory). The table
at the right shows the
supported frequencies.
Installation Procedure
The mainboard accommodates three memory modules. You
must install at least one module in any of the three slots. Each
module can be installed with 32 MB to 512 MB of memory; to-
tal memory capacity is 512 MB.
Refer to the following to install the memory modules.
Frontside Bus
System Memory
(FSB)
Frequency
66 MHz
100 MHz
133 MHz
133 MHz
Note: The memory bus runs at either
100 MHz or 133 MHz independent of
the system bus frequency.
18
Bus (SMB)
Frequency
100 MHz
100 MHz
100 MHz
133 MHz
Advertisement
Table of Contents
