Draytek Vigor 2700 User Manual page 92

Vigor 2700 series firewall router
Hide thumbs Also See for Vigor 2700:
Table of Contents

Advertisement

Enable this account
ISDN
PPTP
IPSec Tunnel
L2TP
Specify Remote Node
86
Check the box to enable this function.
Idle Timeout- If the dial-in user is idle over the limitation of
the time, the router will drop this connection. By default, the
Idle Timeout is set to 300 seconds.
Allow the remote ISDN dial-in connection. You can further set
up Callback function below. You should set the User Name and
Password of remote dial-in user below. This feature is for i
model only.
Allow the remote dial-in user to make a PPTP VPN connection
through the Internet. You should set the User Name and
Password of remote dial-in user below
Allow the remote dial-in user to trigger an IPSec VPN
connection through Internet.
Allow the remote dial-in user to make a L2TP VPN connection
through the Internet. You can select to use L2TP alone or with
IPSec. Select from below:
None - Do not apply the IPSec policy. Accordingly, the VPN
connection employed the L2TP without IPSec policy can be
viewed as one pure L2TP connection.
Nice to Have - Apply the IPSec policy first, if it is applicable
during negotiation. Otherwise, the dial-in VPN connection
becomes one pure L2TP connection.
Must -Specify the IPSec policy to be definitely applied on the
L2TP connection.
Check the checkbox-You can specify the IP address of the
remote dial-in user or peer ID (used in IKE aggressive mode).
Vigor2700 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents