Draytek Vigor 2700 User Manual page 49

Vigor 2700 series firewall router
Hide thumbs Also See for Vigor 2700:
Table of Contents

Advertisement

The port redirection can only apply to incoming traffic.
To use this function, please go to NAT page and choose Port Redirection web page. The
Port Redirection Table provides 10 port-mapping entries for the internal hosts.
Service Name
Protocol
Public Port
Private IP
Private Port
Active
Note that the router has its own built-in services (servers) such as Telnet, HTTP and FTP etc.
Since the common port numbers of these services (servers) are all the same, you may need to
reset the router's in order to avoid confliction.
Vigor2700 Series User's Guide
Enter the description of the specific network service.
Select the transport layer protocol (TCP or UDP).
Specify which port can be redirected to the specified Private IP and
Port of the internal host.
Specify the private IP address of the internal host providing the
service.
Specify the private port number of the service offered by the internal
host.
Check this box to activate the port-mapping entry you have defined.
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents