Draytek Vigor 2700 User Manual page 112

External IP
SIP PING interval
Status
Profile Name
Register via
SIP Port
Domain/Realm
Proxy
Act as Outbound Proxy
Display Name
106
Type in the gateway IP address.
The default value is 150 (sec). It is useful for a Nortel server
NAT Traversal Support.
Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. – means
the account is failed to register on SIP server.
Assign a name for this profile for identifying. You can type
similar name with the domain. For example, if the domain name
is draytel.org, then you might set draytel-1 in this field.
If you do not want to register for VoIP phone, please choose
None. In addition, some SIP server allows users to use VoIP
function without registering. For such server, please check the
box of make call without register. Choosing Auto is
recommended. The system will select a proper way for your
VoIP call.
Set the port number for sending/receiving SIP message for
building a session. The default value is 5060. Your peer must
set the same value in his/her Registrar.
Set the domain name or IP address of the SIP Registrar server.
Set domain name or IP address of SIP proxy server. By the time
you can type:port number after the domain name to specify that
port as the destination of data transmission (e.g.,
nat.draytel.org:5065)
Check this box to make the proxy acting as outbound proxy.
The caller-ID that you want to be displayed on your friend's
screen.
Vigor2700 Series User's Guide