Draytek Vigor 2700 User Manual page 137

Vigor 2700 series firewall router
Hide thumbs Also See for Vigor 2700:
Table of Contents

Advertisement

Settings
Pre-shared Key
Bridge
Repeater
Access Point Function
Status
Vigor2700 Series User's Guide
Encryption Mode - If you checked the box of Use the same
WEP key ..., you do not need to choose 64-bit or 128-bit as the
Encryption Mode. If you do not check that box, you can set the
WEP key now in this page.
Key Index - Choose the key that you want to use after selecting
the proper encryption mode.
Key - Type the content for the key.
Type 8 ~ 63 ASCII characters or 64 hexadecimal digits leading
by "0x".
If you choose Bridge as the connecting mode, please type in the
peer MAC address in these fields. Six peer MAC addresses are
allowed to be entered in this page at one time. Yet please
disable the unused link to get better performance. If you want to
invoke the peer MAC address, remember to check Enable box
in the front of the MAC address after typing.
If you choose Repeater as the connecting mode, please type in
the peer MAC address in these fields. Two peer MAC addresses
are allowed to be entered in this page at one time. Similarly, if
you want to invoke the peer MAC address, remember to check
Enable box in the front of the MAC address after typing.
Click Enable to make this router serving as an access point;
click Disable to cancel this function.
It allows user to send "hello" message to peers. Yet, it is valid
only when the peer also supports this function.
131

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents