Bind Ip To Mac - Draytek Vigor 2700 User Manual

3 . 2 . 5 B i n d I P
3 . 2 . 5 B i n d I P
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding together
cannot be changed. If you modified the binding IP or MAC address, it might cause you not
access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Enable
Disable
Strict Bind
ARP Table
Select All
Sort
Refresh
Add and Edit
Vigor2700 Series User's Guide
t o M A C
t o M A C
Click this radio button to invoke this function. However, IP/MAC
which is not listed in IP Bind List also can connect to Internet.
Click this radio button to disable this function. All the settings on
this page will be invalid.
Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
This is LAN ARP table of this router. The information for IP and
MAC will be displayed in this field. Each pair of IP and MAC
address listed in ARP table can be selected and added to IP Bind
List by clicking Add below
Click this link to select the whole content in the ARP Table or IP
Bind List.
Click this link to display the list by using the order of IP address.
It is used to refresh the ARP table. When there is one new PC
added to the LAN, you can click this link to obtain the newly ARP
table information.
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind with
the assigned IP address.
.
41