Wake On Lan - Draytek Vigor 2700 User Manual

Vigor 2700 series firewall router
Hide thumbs Also See for Vigor 2700:
Table of Contents

Advertisement

3
.
6
.
6
W
a
k
e
o
3
.
6
.
6
W
a
k
e
o
A PC client on LAN can wake up specified PC through the router. Yet the specified PC must
have installed a network card supporting WOL function. By the way, WOL function must be
set as "Enable" on the BIOS setting of the specified PC.
Wake by
IP Address
MAC Address
Wake Up!
Vigor2700 Series User's Guide
n
L
A
N
n
L
A
N
Two types provide for you to wake up the binded IP. If you
choose Wake by MAC Address, you have to type the correct
MAC address of the host in MAC Address boxes. If you choose
Wake by IP Address, you have to choose the correct IP address.
The IP address should be binded with MAC address configured
in Bind IP to MAC page.
The IP addresses that have been configured in Firewall>>Bind
IP to MAC will be shown in this drop down list. Choose the IP
address from the drop down list that you want to wake up.
Type any one of the MAC address of the binded PCs.
Click this button to wake up the selected IP. See the following
figure. The result will be shown on the box.
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents