Ipsec Peer Identity - Draytek Vigor 2700 User Manual

IPSec Security Method
3 . 7 . 4 I P S e c P
3 . 7 . 4 I P S e c P
To use digital certificate for peer authentication in either LAN-to-LAN connection or Remote
User Dial-In connection, here you may edit a table of peer certificate for selection. As shown
below, the router provides 32 entries of digital certificates for peer dial-in users.
Set to Factory Default
Index
Name
Next
Click each index to edit one peer digital certificate. There are three security levels of digital
signature authentication: Fill each necessary field to authenticate the remote peer. The
following explanation will guide you to fill all the necessary fields.
Vigor2700 Series User's Guide
e e r I d e n t i t y
e e r I d e n t i t y
Pre-Shared Key- Specify a key for IKE authentication
Re-type Pre-Shared Key-Confirm the pre-shared key.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High - Encapsulating Security Payload (ESP) means payload
(data) will be encrypted and authenticated. You may select
encryption algorithm from Data Encryption Standard (DES),
Triple DES (3DES), and AES.
Click it to clear all indexes.
Click the number below Index to access into the setting page of

IPSec Peer Identity.

Display the profile name of that index.
Click this link to access into next page for setting more
accounts.
83