Filter Setup - Draytek Vigor 2700 User Manual

Vigor 2700 series firewall router
Hide thumbs Also See for Vigor 2700:
Table of Contents

Advertisement

Call Filter
Data Filter
Log Flag
Some on-line games (for example: Half Life) will use lots of fragmented UDP packets to
transfer game data. Instinctively as a secure firewall, Vigor router will reject these fragmented
packets to prevent attack unless you enable Accept Incoming Fragmented UDP Packets. By
checking this box, you can play these kinds of on-line games. If security concern is in higher
priority, you cannot enable Accept Incoming Fragmented UDP Packets.
3
.
4
.
3
F
i
l
t
e
r
S
e
3
.
4
.
3
F
i
l
t
e
r
S
Click Firewall and click Filter Setup to open the setup page.
To edit or add a filter, click on the set number to edit the individual set. The following page
will be shown. Each filter set contains up to 7 rules. Click on the rule number button to edit
each rule. Check Active to enable the rule.
Vigor2700 Series User's Guide
Check Enable to activate the Call Filter function. Assign a start filter
set for the Call Filter.
Check Enable to activate the Data Filter function. Assign a start filter
set for the Data Filter.
For troubleshooting needs you can specify the filter log here.
None - The log function is not activated.
Block - All blocked packets will be logged.
Pass - All passed packets will be logged.
No Match - The log function will record all packets that are not
matched.
Note that the filter log will be displayed on the Telnet terminal when
you type the log -f command.
t
u
p
e
t
u
p
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents