Table of Contents
Advertisement
Figure 2-6
With the Web Monitor, configured interlocking causes are output on the device display. They are marked by
letters explained in the following table.
Table 2-2
Interlocking Commands
Switching Authority
System interlocking
Zone controlled
SET = ACTUAL (switch direction check)
Control Logic using CFC
For bay interlocking, a release logic can be created using CFC. Via specific release conditions the information
"released" or "bay interlocked" are available (e.g. object " Close" and " Open" with the data values: ON/OFF).
SIPROTEC, 6MU805, Manual
C53000-G1140-C380-5, Release date 06.2018
DIGSI Dialog Box 'Object Properties' for Setting the Interlocking Conditions
Command types and corresponding messages
2.4 Command Processing
Abbrev.
L
S
Z
P
Functions
Display
L
A
Z
P
53
Advertisement
Table of Contents
