Siemens SIPROTEC 6MU805 User Manual page 2

Merging unit

Table of Contents

Note

For your own safety, observe the warnings and safety instructions contained in this document, if available.

Disclaimer of Liability

This document has been subjected to rigorous technical review

before being published. It is revised at regular intervals, and any

modifications and amendments are included in the subsequent

issues. The content of this document has been compiled for infor-

mation purposes only. Although Siemens AG has made best efforts

to keep the document as precise and up-to-date as possible,

Siemens AG shall not assume any liability for defects and damage

which result through use of the information contained herein.

This content does not form part of a contract or of business rela-

tions; nor does it change these. All obligations of Siemens AG are

stated in the relevant contractual agreements.

Siemens AG reserves the right to revise this document from time to

time.

Document version: C53000-G1140-C380-5.03

Edition: 06.2018

The disclosure, duplication, distribution and editing of this docu-

ment, or utilization and communication of the content are not per-

mitted, unless authorized in writing. All rights, including rights

created by patent grant or registration of a utility model or a design,

are reserved.

Registered Trademarks

SIPROTEC

, SINAUT

, SICAM

trademarks of Siemens AG. Other designations in this manual

might be trademarks whose use by third parties for their own pur-

poses would infringe the rights of the owner.

, and DIGSI

are registered

Table of Contents