Table of Contents
Advertisement
TMS320C6745, TMS320C6747
SPRS377F – SEPTEMBER 2008 – REVISED JUNE 2014
5 Device Operating Conditions
5.1
Absolute Maximum Ratings Over Operating Case Temperature Range
(Unless Otherwise Noted)
Supply voltage ranges
Input voltage ranges
Output voltage ranges
Clamp Current
Operating Junction Temperature ranges,
T
J
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to VSS, PLL0_VSSA, OSCVSS, RTC_VSS
(3) Up to a max of 24 hours.
5.2
Handling Ratings
Storage temperature
(default)
range, T
stg
Human Body Model (HBM)
ESD Stress Voltage,
(1)
V
Charged Device Model (CDM)
ESD
(1) Electrostatic discharge (ESD) to measure device sensitivity/immunity to damage caused by electrostatic discharges into the device.
(2) Level listed above is the passing level per ANSI/ESDA/JEDEC JS-001-2010. JEDEC document JEP155 states that 500V HBM allows
safe manufacturing with a standard ESD control process, and manufacturing with less than 500V HBM is possible if necessary
precautions are taken. Pins listed as 1000V may actually have higher performance.
(3) Level listed above is the passing level per EIA-JEDEC JESD22-C101E. JEDEC document JEP157 states that 250V CDM allows safe
manufacturing with a standard ESD control process. Pins listed as 250V may actually have higher performance.
60
Device Operating Conditions
(1)
Core
(CVDD, RVDD, RTC_CVDD, PLL0_VDDA )
I/O, 1.8V
(USB0_VDDA18, USB1_VDDA18)
I/O, 3.3V
(DVDD, USB0_VDDA33, USB1_VDDA33)
V
I/O, 1.2V
I
(OSCIN, RTC_XI)
V
I/O, 3.3V
I
(Steady State)
V
I/O, 3.3V
I
(Transient)
V
I/O, USB 5V Tolerant Pins:
I
(USB0_DM, USB0_DP, USB0_ID, USB1_DM, USB1_DP)
V
I/O, USB0 VBUS
I
V
I/O, 3.3V
O
(Steady State)
V
I/O, 3.3V
O
(Transient Overshoot/Undershoot)
Input or Output Voltages 0.3V above or below their respective power
rails. Limit clamp current that flows through the I/O's internal diode
protection cells.
Commercial
Industrial (D suffix )
Extended (A suffix)
Automotive (T suffix)
(2)
(3)
Submit Documentation Feedback
Product Folder Links:
TMS320C6745 TMS320C6747
(2)
(2)
(2)
Copyright © 2008–2014, Texas Instruments Incorporated
www.ti.com
-0.5 V to 1.4 V
-0.5 V to 2 V
-0.5 V to 3.8V
-0.3 V to CVDD + 0.3V
-0.3V to DVDD + 0.35V
DVDD + 20%
up to 20% of Signal
Period
(3)
5.25V
(3)
5.50V
-0.5 V to DVDD + 0.3V
20% of DVDD for up to
20% of the signal period
±20mA
0°C to 90°C
-40°C to 90°C
-40°C to 105°C
-40°C to 125°C
UNIT
-55 to 150
°C
>2000
V
>500
V
Advertisement
Table of Contents
