Installing The Paper Feeder (Option) - Kyocera KM-2550 Service Manual

1-3-3

Installing the paper feeder (option)

<Procedure>
1. Place the MFP on the paper feeder by align-
ing the positioning insertion sections of the
MFP with the positioning pins at the rear
part of the paper feeder.
* When placing the MFP, take care not to hit
the MFP against the drawer, the pins or
ground plate of the paper feeder.
For stacking paper feeders for use:
Stack a paper feeder on another paper feeder by
aligning the positioning insertion sections of the
first paper feeder with the positioning pins at the
rear part of the second paper feeder.
(Two paper feeders can be added.)
2. If a type of paper that is not included in the
specifications for the standard sheet cas-
sette size is used, replace the cassette size
sheet indication with the supplied one.
3. Insert the MFP power plug into the wall out-
let and turn the power switch on. Load paper
in the drawer and make test copies to check
the operation.
Paper feeder
Figure 1-3-5
Figure 1-3-6
Figure 1-3-7
2FT
Positioning pins
Positioning
pins
Cassette size
sheet indication
1-3-7