Kyocera KM-2550 Service Manual page 129

2FT
Default operation mode
Sets whether the display that appears after power is
turned on to the machine will be the one for the copy
operation mode or for the fax operation mode. This set-
ting is only available when the optional fax kit is
installed.
1. Select [Main mode] and then press the enter key.
2. Select [Copy mode] or [Fax mode] and then press
the enter key.
Key sound ON/OFF
Sets whether or not the operation panel will emit a
beep sound each time a key is pressed.
1. Select [Key sound On/Off] and then press the enter
key.
2. Select [On] or [Off] and then press the enter key.
Day and time
Sets the current date and time.
1. Select [Date/Time] and then press the enter key.
2. Sets the current date and time.
3. Select [End] and then press the enter key.
Display contrast adjustment
Adjust the display contrast.
1. Select [Display Contrast] and then press the enter
key.
2. Adjust the contrast and then press the enter key.
Setting range: 1 to 7
Changing the management code
Changes the management code.
1. Select [PIN # Change] and then press the enter
key.
2. Enter a new 4-digit management code using the
numeric keys.
Auto sleep ON/OFF
Sets whether or not to have the auto sleep function.
This setting is displayed only on the inch specification
model.
1. Select [Auto Sleep] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Auto clear ON/OFF
Sets whether or not to have the auto clear function.
1. Select [Auto Clear] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
1-4-60
Auto clear time
Sets the time that elapses from completion of copying
to activation of the auto cler function.
1. Select [Auto Clear Time] and then press the enter
key.
2. Sets the time and then press the enter key. Setting
range: 10 to 270 s
Silent mode ON/OFF
Sets whether or not to use the silent mode which short-
ens the length of time that the laser data writing motor
continues to spin after each copy job is finished.
1. Select [Silent Mode] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.