Installing The Finisher (Option) - Kyocera KM-2550 Service Manual

2FT
1-3-8

Installing the finisher (option)

<Note>
When placing the transfer unit on the floor or the
like, be sure to place it upside down. If not, the
staple mounting plate may be deformed, resulting
in a malfunction.
Be sure to remove the tape for the intermediate
tray at Procedure 16 not removing before mount-
ing.
<Procedure>
Remove the covers.
1. Remove the two screws to remove the
upper left cover.
1-3-22
Transfer unit
Figure 1-3-35
Figure 1-3-36
Upper left cover
Screws
Figure 1-3-37
Intermediate tray