Table of Contents
Advertisement
12 Inch Tilt/Lectern Touchpanels
DIAGNOSTICS MENU
14 • 12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV
NOTE: When using the TPS-4500IMPC with the TPS-4500V, the appropriate
inputs must be selected. Refer to the latest revision of the TPS-4500IMPC Interface
Module Operations Guide (Doc. 6163, included with the TPS-4500V touchpanel) for
details.
NOTE: A solid blue screen is displayed in the video window if a video signal is not
detected or is very weak. Verify that the video source is functioning and properly
connected. If the source is properly connected and functioning, a distribution
amplifier may need to be used.
Fast motion mode (if the Fast Motion button is selected) reduces motion artifacts
and should be used for most video sources. Still video mode (if the Still Video
button is selected) works best for still pictures. It has a maximum resolution and
reduces flicker. However, it suffers from motion artifacts. The text color of the
selected button is red rather than black.
Select the Soft button for soft mode video. In this mode, video filtering and noise
reduction can produce a better image from some sources. Alternatively, select the
Sharp button for sharp mode video. This mode provides maximum detail, but is
more susceptible to noise in source. The text color of the selected button is red rather
than black.
Select the Return button, located at the lower right corner of the Video Menu, after
video parameters have been set.
Diagnostics Menu
The Diagnostics button from the MAIN MENU contains diagnostic tools. The
diagnostic tools should only be used under supervision from a Crestron customer
service representative during telephone support. The options available from the
DIAGNOSTICS MENU, shown to the left, are numeric in nature and their
interpretation is beyond the scope of this manual.
NOTE: The "About..." button will display a screen indicating the current version
of firmware residing on the touchpanel.
Hardware Hookup
Make the necessary connections as called out in the following illustrations. Refer to
"Network Wiring" on page 9 before attaching the NET or NET/VIDEO connector.
Apply power after all connections have been made.
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling (mounting/installation). Doing so can crack the screen and damage the
touchpanel.
Crestron TPS-4500V & TPS-4500LV
Operations Guide - DOC. 6160
Advertisement
Table of Contents
