Crestron Isys TPS-4500LV Operation Manual page 19

Crestron TPS-4500V & TPS-4500LV
Operations Guide - DOC. 6160
TPS-4500LV
Hardware Connections for the TPS-4500LV (Back of the Unit is Shown)
NET
RS-232
VIDEO
NET
This 4-pin Cresnet connector provides Cresnet network connection from the
touchpanel as well as power to the touchpanel. A description of the pinouts is shown
in the table after this paragraph. Refer to "Network Wiring" on page 9 for details.
NET Pinouts
PIN # DESIGNATION
1 24
2 Y
3 Z
4 G
RS-232
This 6-pin RJ-11 connector mates with a serial port of a PC. The connecting cable is
not supplied. Prior to installation, use this port for direct connection between the
touchpanel and a PC to load files to a touchpanel without a network connection. In
the event that modular cables or an RJ-11 to DB9F adapter is not available, the
following table and diagram provide information so that the cable can be fabricated
on site. Refer to "RS-232 Menu" on page 13 for proper RS-232 port configuration
settings. Refer to "Appendix A: RS-232 Protocol" on page 42 for protocol details.
12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV • 15
12 Inch Tilt/Lectern Touchpanels
DESCRIPTION
Power
Data
Data
Ground