Crestron Isys TPS-4500LV Operation Manual page 38

12 Inch Tilt/Lectern Touchpanels
34 • 12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start SIMPL
Windows, and from the menu bar, select Tools | Viewport.
2. Refer to the following figure. From the Viewport menu, select Setup |
Communications settings (alternatively, press Alt+D) to open the "Port
Settings" window.
Setup | Communications Settings Command
3. Select RS-232 as the connection type. Verify that an available COM port
(COM 1 is shown after this step) is selected, and that all communication
parameters and necessary options from the "Port Settings" window are
selected as shown after this step. Click the OK button to save the settings
and close the window.
"Port Settings" Window
Crestron TPS-4500V & TPS-4500LV
Operations Guide - DOC. 6160